INDIRECT / DIRECT COPPER CYLINDERS

Cylinders are manufactured to British Standards, and Kitemarked where stated. BS 1566 : Part 1 : 1984 Double Feed Indirect Copper Cylinders.
BS 3198 : 1981 Combination Tanks. BS 699 : 1984 Direct Copper Cylinders. Grade 3 - Test pressure 1.45 bar (21 p.s.i.) for 10 metre (33 ft) maximum working head. They comply with the proposed changes to Part L of the Building Regulations. The new cylinder specification, which the cylinders below meet, includes a Grade 3 cylinder with Grade 2 bottom, 35 mm thick foam insulation, the omission of the sacrificial anode, and a high recovery coil. Fitted with immersion heater boss.
For Immersion heaters to fit please click here

Indirect Copper Cylinders

Grade 3 BS Kitemarked
Indirect copper cylinders to BS 1566. Part 1 : 1984 made for use with wet central heating systems. All indirects have 2 x 1" BSP male primaries, 2 x 1" BSP female and 1 x 2.1/4" BSP immersion heater boss.
Suitable for fully pumped systems only.
Part No.DescriptionUnit PriceQty
15206 36" (900 mm) x 18" (450 mm). 117 litres £172.04
15207 42" (1050 mm) x 16" (400 mm). 114 litres £172.05
15208 42" (1050 mm) x 18" (450 mm). 140 litres £190.30

Indirect Combination Tank

Grade 3 made to BS 3198
Combination unit offering traditional open - vented stored hot water in the indirect pattern. By storing the cold supply, tanks can be taken from the loft space. Installation is made simpler without the need to run pipes to and from a cold cistern. The indirect combination tank has 2 x 1" BSP male primaries, 1 x 1" BSP female, 1 x 1/2" BSP female and 1 x 2.1/4" BSP immersion heater boss.
Suitable for fully pumped systems only.
  Hot Volume Cold Volume
15211 115 litres 20 litres
15210 120 litres 40 litres
Part No.DescriptionUnit PriceQty
15211 42" (1075 mm) x 18" (450 mm). £277.93
15210 48" (1200 mm) x 18" (450 mm). £312.92

Direct Copper Cylinder

Grade 3 BS Kitemarked
Direct copper cylinders to BS 699 : 1984 for use in electric homes or where a solid fuel powered heating system is installed.
4 x 1" BSP female and 1 x 2.1/4" BSP immersion heater boss.
Part No.DescriptionUnit PriceQty
15209 36" 900 mm x 450 mm (36" x 18"). 120 litres £158.44
15212 42" 1050 mm x 450 mm (42" x 18"). 144 litres £175.13

Stainless Steel Direct Cylinders

With welded joints tested to 3 bar, 22mm compression fittings, and 35mm insulation. Comply with Part L of Building Regs. Tapping heights as BS 1566.
Part No.DescriptionUnit PriceQty
20401 36" (900mm) x 18" (450mm), 122 litres £123.14
20402 42" (1050mm) x 18" (450mm), 145 litres £138.49
20403 48" (1200mm) x 18" (450mm), 168 litres £163.28
20404 60" (1500mm) x 18" (450mm), 213 litres £216.69
20405 72" (1800mm) x 18" (450mm), 263 litres £258.66

Stainless Steel Indirect Cylinders

With welded joints tested to 3 bar, 22mm compression fittings, and 35mm insulation. Comply with Part L of Building Regs. Tapping heights as BS 1566.
Part No.DescriptionUnit PriceQty
20406 36" (900mm) x 18" (450mm), 119 litres £139.27
20407 42" (1050mm) x 18" (450mm), 141 litres £159.17
20408 48" (1200mm) x 18" (450mm), 164 litres £181.93
20409 60" (1500mm) x 18" (450mm), 207 litres £241.41
20410 72" (1800mm) x 18"(450mm), 256 litres £298.35