STAINLESS STEEL GAS FLEXIBLE PIPE

GAS SAFE REGISTER TM1
TracPipe® is a stainless steel, semi-rigid (bendable) corrugated gas pipe with a yellow polyethylene cover. The cover is fire and smoke retardant. Semi-rigid piping has been used in North America for 20 years and Japan for 30 years. TracPipe® and its associated fittings (including Autoflare® connectors) are Kitemarked and Advantica (formerly B G Technology) approved to BS 7838:1996 Corrugated stainless steel semi-rigid pipe and associated fittings for low pressure gas pipework of up to DN50. BS 7838 applies to corrugated pipe and fittings which are suitable for a maximum working pressure of 75 mbar when installed in accordance with BS 6891 or BS 5482 Part 1 in domestic premises, or in accordance with IGE/UP/2 in other premises.

No welding, soldering or threading is needed. An Autoflare® fitting, two spanners, a utility knife and a Tracpipe® ( Click Here ) tube cutter are required to make a join. Also listed below are taper male fittings which allow TracPipe® to be connected to other pipes or fittings. The pipe may be bent by hand, but must NOT be used where repeated bending occurs after installation. For working pressures up to 75 mbar.

Tube Dimensions
size
Nominal ID
Cover OD
Min . Recommended Bend Radius
12 mm
11.2 mm
17 mm
76 mm
15 mm
15.2 mm
22.1 mm
76 mm
22 mm
20.8 mm
28.2 mm
76 mm
28 mm
26.9 mm
35.1 mm
127 mm
32 mm
32.8 mm
42.3 mm
127 mm
40 mm
38.7 mm
48.8 mm
127 mm
50 mm
52.3 mm
65.8 mm
153 mm

TracPipe® Flexible Gas Pipe

Part No.DescriptionUnit PriceQty
16595 12mm x 30 metres £160.56
16596 12mm x 75 metres £401.39
16597 15mm x 30 metres £189.57
16598 15mm x 75 metres £473.93
16599 22mm x 30 metres £241.32
16600 22mm x 75 metres £603.29
16601 28mm x 55 metres £611.75
20792 28mm x 90 metres £999.81
16602 32mm x 45 metres £706.54
16603 32mm x 75 metres £1,177.57
16604 40mm x 45 metres £957.53
16605 40mm x 75 metres £1,595.88
16606 50mm x 45 metres £1,472.56

TracPipe® Coupling Fittings

To join lengths of TracPipe®.
Part No.DescriptionUnit PriceQty
16630 12mm £13.30
16631 15mm £14.93
16632 22mm £19.88
16633 28mm £27.39
16634 32mm £61.95
16635 40mm £97.72
16636 50mm £140.61

TracPipe® Tees

To join lengths of TracPipe®.
Part No.DescriptionUnit PriceQty
16625 15mm x 15mm x 15mm £20.71
16626 22mm x 22mm x 22mm £28.39
16627 28mm x 28mm x 28mm £44.75
16628 22mm x 22mm x 15mm £28.39
16629 28mm x 28mm x 15mm £44.75

Autoflare Straight BSP Taper Fittings

To connect TracPipe® to other pipes or fittings
Part No.DescriptionUnit PriceQty
16607 12 mm x 3/8" £6.14
16608 15 mm x 1/2" £6.82
16609 22 mm x 3/4" £10.03
16610 28 mm x 1" £16.36
16611 32 mm x 1.1/4" £39.54
16612 40 mm x 1.1/2" £57.27
16613 50 mm x 2" £88.18

Spare Split Rings for Autoflare fittings

Part No.DescriptionUnit PriceQty
16614 12 mm, pack of 10 £4.40
16615 15 mm, pack of 10 £4.40
16616 22 mm, pack of 10 £5.01
16617 28 mm, pack of 10 £6.67
16618 32 mm, pack of 4 £12.36
16619 40 mm, pack of 4 £13.69
16620 50 mm, pack of 4 £21.71

Terminal Mount Fittings

Part No.DescriptionUnit PriceQty
16621 12 mm £11.43
16622 15 mm £11.86
16623 22 mm £12.69
16624 28 mm £18.54

Silicone Tape

Colour : yellow ochre. After pressure testing, this tape must be used to ensure no stainless steel pipe is exposed.
Part No.DescriptionUnit PriceQty
16637 25 mm wide x 11 m £15.02
16638 50 mm wide x 11 m £28.23