MARTINDALE PLUG-IN SOCKET TESTERS

Classic

MARTINDALE classic check plug socket tester is ideal for rapid socket testing. Plugged into a live 13 A socket it will identify almost all faults. Fault indications are instantly identified using the key on the face label. Three long life high intensity neons all indicate when the circuit is correctly wired. This fail safe system means any neon not lighting shows a problem. The check plug induces less than 5 mA of earth leakage, well below RCD trip thresholds. Designed for easy insertion and removal, the case is made from flame retardant ABS.
Part No.DescriptionUnit PriceQty
13485 13 A plug-in socket tester £9.90

Non-trip Earth Loop Impedance Checker

MARTINDALE E-Ze check Xtra socket tester has been designed to check not only if the earth is connected, but also to tell you how good it is. Along with the facility to check the voltage and socket.

SPECIFICATIONS :
Normal operating voltage : 230 V
Frequency : 50 Hz
Non-trip earth loop impedance ranges : 0 - 1.7 - 5 - 10 - 100 - 200 - 500 ohms
Earth loop threshold accuracy : ± (10 % + 0.3 ohms)
Voltage low indication : <195 V
Voltage high indication : >270 V
Open earth indication : >500 ohms
Power consumption : < 1.6 W
Overvoltage category : Cat 11/300 V
Dimensions : approx. 65 mm x 65 mm x 50 mm
Weight : 64 g
Part No.DescriptionUnit PriceQty
15166 E-Ze check Xtra £48.32

‘Buzz-It’ Check Plug with Audible Alarm

A fast and easy way to ensure 13 A sockets are wired correctly. Plugged into a live 13 A socket it will identify almost all faults. Fault indications are instantly identified using the key on the face label. Three long life high intensity LEDs all indicate when the circuit is correctly wired and the ‘Buzz-It’ gives an audible signal to allow any awkwardly placed, or not easily visible sockets to be checked. This fail safe system means any LED not lighting or making an audible signal shows a problem. The check plug induces less than 5 mA of earth leakage, well below RCD trip thresholds. Designed for easy insertion and removal, the case is made from flame retardant ABS. It can also be used as a basic fuse finder, when the correct fuse is pulled the buzzer stops.
Part No.DescriptionUnit PriceQty
20773 BZ101, 13 A plug-in socket tester with audible alarm £15.36

’Safebreak’ Socket Test Adaptor

Essential for safe and fast testing without removing the wall socket faceplate. Enables good connection to the wiring installation using standard 4 mm test probes. Speeds up R2, R1+R2 measurements, periodic, 17th Edition and Part P testing. Suitable for use with any meter with industry standard 4 mm plugs.
Part No.DescriptionUnit PriceQty
20774 ‘Safebreak’ SB13 socket test adaptor - £14.88