THROUGH-WALL FITTINGS

GAS SAFE REGISTER TM1
Through-wall Fittings - Above-ground

Above-ground through-wall fittings which allow the riser to be close to the wall. The fittings are steel, with integral screw down stopper for outside safety shut-off. Fitted with polyethylene cladding and external grommet ; supplied with copper crimp sleeve and star washer. The end of the external pipe has a 3/4" or 1" BSP male thread, as listed below. The connection to the MDPE pipe is crimped and requires a crimping tool. GIS/PL3 approved.

150 mm (dimension A) Wall Thickness
Part No.DescriptionUnit PriceQty
17160 20 mm x 3⁄4" £47.57
17161 25 mm x 3⁄4" £49.29
17162 32 mm x 1" £54.83

345 mm (dimension A) Wall Thickness
Part No.DescriptionUnit PriceQty
17163 20 mm x 3⁄4" £47.91
17164 25 mm x 3⁄4" £49.56
17165 32 mm x 1" £55.11

500 mm (dimension A) Wall Thickness
Part No.DescriptionUnit PriceQty
17166 20 mm x 3⁄4" £67.68
17167 25 mm x 3⁄4" £69.38
17168 32 mm x 1" £77.15

Crimping Tool
Part No.DescriptionUnit PriceQty
17169 20 mm £188.60
17170 25 mm £188.60
17171 32 mm £188.60

GRP Riser Sleeves - Above Ground

Protective glass reinforced plastic sleeves for gas risers. Length 2 metres. Can be cut.


For MDPE Yellow Gas Pipe
Part No.DescriptionUnit PriceQty
11058 GRP riser sleeve to fit 20/25 mm MDPE yellow gas pipe £7.92
11059 GRP riser sleeve to fit 32 mm MDPE yellow gas pipe £9.28

PVC Formed Bends

For MDPE Yellow Gas Pipe
Part No.DescriptionUnit PriceQty
11060 PVC formed bend to fit 20/25 mm MDPE yellow gas pipe £2.98
11061 PVC formed bend to fit 32 mm MDPE yellow gas pipe £4.42