CARBON MONOXIDE ALARMS

GAS SAFE REGISTER TM1
H450EN, Battery Operated, EN 50291, Kitemarked

The H450EN is approved and kitemarked to the European Standard EN 50291 : 2001. Mains wiring is not required ; batteries supplied are pre-fitted. Alarm is an 85 decibel (at 3 m) buzzer and a visual warning. Alarm levels : 50 ppm between 60 and 90 minutes, 100 ppm between 10 and 40 minutes and 300 ppm less than 3 minutes. There is a test facility, a self-check function and an end of detector life audible warning. Operating temperature range is -10°C to +40°C. Humidity range 30 to 90% RH non condensing. May be wall mounted with fixing kit provided, or be free standing.
Part No.DescriptionUnit PriceQty
20793 H450EN battery operated CO alarm1-9 £16.24
  10+ £14.94  

SF 340E, Main Powered

The SF 340E series of carbon monoxide detectors incorporate a unique module replacement system. There are no main unit replacement costs, just a simple clip in module to replace once every 5 years. This results in low ownership costs and minimal maintenance. Locking screws ensure that only authorised persons can gain access to the unit. All SF 340 units also provide up to 5 years of battery backup ensuring continuous protection - even in the event of power loss.
Part No.DescriptionUnit PriceQty
12057 SF340E mains operated CO alarm1-9 £36.15
  10+ £30.80  

SF 340F & SF 340J, Mains Powered

With Relay Output and Interconnect Facility
The SF 340F (230 V AC) and SF 340J (12/24 V DC) units offer all the benefits of the SF 340E above with the addition of relay outputs which enable the operation of gas valves, linking to security systems, sounding remote alarms... etc.
These units can also be linked together in series which means that if one alarm is activated then all the alarms linked to it will be activated.
Part No.DescriptionUnit PriceQty
9408 SF 340F 230 V AC hard wired CO alarm with relay output £52.48
13519 SF 340J 12/24 V DC hard wired CO alarm with relay output £52.48

Replacement Sensor Module for SF 340 Series

The SF 340M is a simple clip-in replacement module for all of the SF 340 series of mains powered carbon monoxide alarms.
Each module has an operational life of 5 years and contains a new sensing cell and battery backup. Suitable for the above models SF 340E (P/N 12057) and SF 340F (P/N 9408).
Part No.DescriptionUnit PriceQty
17224 SF 340M replacement sensor module £20.94

Fire Angel CO-9B Carbon Monoxide Alarm, EN 50291, Kitemarked

The Fire Angel CO-9B carbon monoxide alarm is battery operated with a CO test facility and extended sensor life. Batteries supplied. It is approved and kitemarked to the European Standard EN 50291: 2001.

SPECIFICATIONS :
Approval : BS EN 50291 : 2001 suitable for homes, caravans, river/canal boats and holiday homes.
Alarm : 85 dB at 1 m and red flashing LED.
Battery :2 x 1.5V AA alkaline.

DIMENSIONS : height 67 mm x width 109 mm x depth 38 mm.
Weight : 129 g.
Part No.DescriptionUnit PriceQty
19943 CO-9B carbon monoxide alarm £12.94

Fire Angel CO-9X Carbon Monoxide Alarm, EN 50291, Kitemarked

The Fire Angel CO-9X carbon monoxide alarm has the same specification as above, apart from the battery, which is a non-removable lithium pack, with a 7 year life in normal operating conditions. It is approved and kitemarked to the European Standard EN 50291: 2001.
Weight : 90 g.

DIMENSIONS :
height 72 mm x width 112 mm x depth 35 mm.
Part No.DescriptionUnit PriceQty
19944 CO-9X (7 year) carbon monoxide alarm £14.83

Dicon CO 850Mi, Mains Powered, EN 50291, Kitemarked

The DICON CO 850Mi alarm is approved to BS EN 50291. It measures the concentration of carbon monoxide and sounds a loud alarm when a potentially harmful level is reached. The automatic self-test feature tests the sensor using gas. Features instant test and reset, power, alarm and fault indicators. It can also be linked with up to eleven other CO 850Mi alarms ; when one sounds, they all do.

SPECIFICATION :
Alarm sound level : 85 dB at 3 m
Detection method : electro-chemical sensing technology
Sensitivity :            low set point of 50 ppm
Temperature range : -10 °C to 40 °C
Operating voltage :  230 V AC 50 - 60 Hz, 10 W
Dimensions :          134 mm high x 69 mm width x 60 mm deep
Part No.DescriptionUnit PriceQty
17201 Dicon CO 850Mi £22.50

CO850MBXi CO Alarm with Battery Back-up

The CO850MBXi 230 V mains powered carbon monoxide alarm uses the latest in electro-chemical sensing technology with 9 V PP3 alkaline battery back-up (battery included). Instant test/reset feature. Interlink up to 12 compatible alarms of the same manufacture. Power, alarm and fault indicators. Wall mounted. Approved to BS EN 50291 : 2001.
SPECIFICATIONS :
Technology : electro-chemical sensing technology.
Sensitivity : low set point of 50 ppm.
Alarm sound level : 85 dB at 1 m.
Operating temperature : -10°C to + 40°C.
Operating humidity : 30% to 90% relative.
Dimensions : 134 mm (H) x 69 mm (W) x 60 mm (D).
   
Part No.DescriptionUnit PriceQty
20789 CO850MBXi CO alarm with battery back-up £33.15

Omnitron Plug-in Carbon Monoxide Alarm

Plug-in audio and visual alarm to detect carbon monoxide.
Power supply : AC 220 V/AC 110 V.
Power frequency : 50 Hz.
Consumption : ≤ 3 W.
Alarm level : 150 ppm.
Response time : ≤ 30 s.
Min/max working temp. : 0°C to 55°C.
Audio alarm : 70 dB.
CE and ROHS approved.
Part No.DescriptionUnit PriceQty
19544 Carbon monoxide alarm £18.99