CARAVAN REGULATOR & FITTINGS

GAS SAFE REGISTER TM1
New caravan and motor home regulations. BS EN 1949:2002 requires regulators (to BS EN 12864:2001 Annex D) to be fitted within gas lockers in new caravans and motor homes (from September 2003). P/N 16543 below meets this specification. The other products below are for use with the regulator and gas bottle.

Low Pressure Regulator for Leisure Vehicles

Low pressure requlator designed to comply with BS EN 1949:2002 (EN 12864:2001 Annex D). For touring and motor caravans with appliances operating at 30 mbar. Integral pressure relief valve and test point, 1.5 kg/h, 30mbar operating pressure for propane, butane and LPG mix. Inlet M20 outlet 10mm compression, complete on mounting bracket. Hose P/N 16639, 16852, 16640, or 16853 (below) may be used to connect the regulator to the gas bottle. The M20 thread on the regulator accepts the W20 thread on the hoses. Alternatively 400mm hose P/N 16712 or 1500mm hose 17802 will attach the adaptors (below) to the regulator.
Part No.DescriptionUnit PriceQty
16543 Low Pressure Regulator £20.71

Low Pressure Caravan Regulator

Low pressure caravan regulator complying with BS EN 1949 : 2002 (BS EN 12864 : 2001 Annex D). For touring and motor caravans with appliances operating at 30 mbar. Integral pressure relief valve and test point, 30 mbar operating pressure for propane, butane and LPG mix. Inlet angled M20, outlet 10 mm compression complete with mounting bracket. Hoses P/Ns 16639, 16852, 16640 or 16853 may be used to connect the regulator to the gas bottle. Alternatively 400mm hose P/N 16712 or 1500mm hose 17802 will attach the adaptors (below) to the regulator.
Part No.DescriptionUnit PriceQty
19905 Angled inlet caravan low pressure regulator £27.04

Adaptors for Gas Bottles

Adaptors to connect a clip-on or Camping Gaz type gas bottle to the regulator P/N 16543 (above). Hose P/N 16712 or 17802 (below) will be needed to complete the connection. The M20 thread on these valves accepts the W20 thread on the hose. The Camping Gaz item P/N 16643 is fitted with an on-off valve, clip-on items are not. Other bottles, with threaded propane or butane connections, need hose P/N 16639, 16852, 16640, or 16853 (below), which run directly from the bottle to the regulator.

Inlet and outlet connections
Clip-on : Clip-on - M20 x 1.5
Camping Gaz : M16 x 1.5 - M20 x 1.5
Part No.DescriptionUnit PriceQty
16642 21 mm clip-on adaptor £6.99
17917 27 mm clip-on adaptor £6.99
16643 Camping Gaz adaptor £8.51

Hose Assemblies

High pressure black hose to (and marked) BS 3212 : Type 2. 6.3 mm i.d., 15.5 mm o.d., 17.5 bar working pressure, 52 bar burst pressure. Unbraided. A self adhesive advisory label is attached to every hose. N/R indicates a non-return/excess flow valve. P/Ns 16639, 16852, 16640 and 16853 connect directly from the bottle to the regulator above. P/Ns 16712 and 17802 connect from the adaptors above to the regulator above.

For propane only.
Part No.DescriptionUnit PriceQty
16639 400 mm long, N/R POL + 5/8" LH nut x W20 nut + tail. £6.27
16852 1500 mm long, N/R POL + 5/8" LH nut x W20 nut + tail. £9.02

For butane only.
Part No.DescriptionUnit PriceQty
16640 400 mm long, N/R butane x W20 nut + tail £6.16
16853 1500 mm long, N/R butane nut x W20 nut + tail £8.91

For propane or butane only.
Part No.DescriptionUnit PriceQty
16712 400 mm length, W20 nut + tail, both ends £3.96
17802 1500 mm length, W20 nut + tail, both ends £6.16