RESTRICTORS

GAS SAFE REGISTER TM1
Brass restrictors for gas fire installations, having 1/4" BSP taper female BS 21 inlets, and 8 mm or 12 mm compression outlets. The restrictors are supplied complete with compression nuts and olives. 8 mm and 12 mm gas fire tubes can be found by clicking this link: Gas Fire Tubes. Washers : The washer under the top screw has traditionally been made of red fibre. British Gas specified a bonded seal for this purpose; this is a plated steel washer with rubber-type material bonded to it.The restrictors below have either fibre or PTFE washers unless otherwise stated. All restrictors below are for use with Natural Gas. Only restrictors with bonded seals are for use with LPG. Spares : Spares for restrictors can be found by clicking the following link: Gas Fire Fixing.

1" x 8 mm

with bonded seal
For Natural Gas only, 1" high, 8 mm x 1/4" BSP T F
Part No.DescriptionUnit PriceQty

1" x 12 mm

For Natural Gas only. 1" high, 12 mm x 1/4" BSP T F
Part No.DescriptionUnit PriceQty

North Thames Pattern

For Natural Gas only. 8 mm X 1/4" BSP T F. 1.3/4" overall length. These restrictors can not be used to isolate gas supply to the appliance.
Part No.DescriptionUnit PriceQty

1" x 8 mm, Pedestal Elbow

with bonded seal
For Natural Gas and LPG. 1 " high, 8 mm x 1/4" BSP T F.
Part No.DescriptionUnit PriceQty

2" x 8 mm

Part No.DescriptionUnit PriceQty

2" x 8 mm

with bonded seal
For Natural Gas and LPG . 2" high, 8mm x 1/4" BSP T F.
Part No.DescriptionUnit PriceQty

2" x 12 mm

For Natural Gas only. May be supplied as a kit. 2" high, 12 mm x 1/4" BSP T F
Part No.DescriptionUnit PriceQty

4" x 8 mm

For Natural Gas only. May be supplied as a kit. 4" high, 8 mm x 1/4" BSP T F
Part No.DescriptionUnit PriceQty

4" x 12 mm

For Natural Gas only. May be supplied as a kit. 4" high, 12mm x 1/4" BSP T F
Part No.DescriptionUnit PriceQty