This website uses cookies to ensure that we give you the best experience possible. If you continue to use this site we will assume you are happy to receive all cookies on the BES website. To read our cookie policy click here.

AcceptCookies

BES
contact
cart View Order | Total £0.00ex VAT
My Account |  Print  BES_Print
Previous 6 7 8 9 10 11 12 13 14 15 16 Next

Gas Fire Tubes, Restrictors & Kits

GAS FIRE TUBES

Copper tubes with various decorative finishes incorporating copper tube to BS EN 1057:2006+A1:2010 (Formerly BS 2871-1:1971 Table X and EN 1057:1996 half hard). The polished brass finish is achieved by brass plating the copper tube and polishing the plated surface.The brass plated and lacquered finish is obtained by brass plating the copper tube and then lacquering it.
For Natural Gas and LPG.

Chrome Plated

Part No.Description Unit PriceQty
4929 1 m x 8 mm o.d. gas fire tube1-24 £2.43
  25+ £2.38  
4930 1.25 m x 8 mm o.d. gas fire tube 1-24 £5.55
  25+ £4.99  
0303 1 m x 12 mm o.d gas fire tube 1-24 £8.03
  25+ £7.23  
0304 1.25 m x 12 mm o.d. gas fire tube1-24 £9.24
  25+ £8.32  

Polished Brass

(see note above)
Part No.Description Unit PriceQty
0299 1 m x 8 mm o.d. gas fire tube 1-24 £6.74
  25+ £6.07  
0300 1.25 m x 8 mm o.d. gas fire tube 1-24 £6.17
  25+ £5.55  

Coin Bronze

Part No.Description Unit PriceQty
3821 1 m x 8 mm o.d. gas fire tube1-24 £5.90
  25+ £5.31  
3823 1.25 m x 8 mm o.d. gas fire tube1-24 £6.71
  25+ £6.03  
3825 1 m x 12 mm o.d. gas fire tube 1-24 £10.26
  25+ £9.23  
3827 1.25 m x 12 mm o.d. gas fire tube 1-24 £12.24
  25+ £11.02  

Brass Plated and Lacquered

(see note above)
Part No.Description Unit PriceQty
5241 1 m x 8 mm o.d. gas fire tube 1-24 £4.91
  25+ £4.41  
5242 1.25 x 8 mm o.d gas fire tube 1-24 £5.76
  25+ £5.18  

GAS FIRE ISOLATION VALVES

Time-saving new restrictors. Designed to cut gas fire installation time by having 8 mm compression inlets, and by attaching either directly to the gas fire elbow or to 8 mm copper or bundy tube. Ideal for concealed fixing. The 1/4" BSP male flare fits directly to Robinson Willey fires, including the Visa range, as well as Valor and Cannon appliances, while the M16 flare fits directly to older Robinson Willey designs. The restrictor with the test point may ease contract servicing. With all five restrictors the gas can be completely isolated using an internal fitted screw. This provides a servicing valve as required by the Gas Regulations. Brass, with brass finish. All valves are fitted with a bonded seal under the top screw. Tested in the UK by a BS EN ISO 9001:2008 registered company. Tested in compliance with the European Gas Appliance Directive by British Gas.
For Natural Gas and LPG.

Part No.Description Unit PriceQty
12703 8 mm comp. x 1/4" BSP male flare1-99 £2.44
  100+ £2.20  

Part No.Description Unit PriceQty
12706 8 mm comp. x 8 mm diameter standpipe £2.56

Part No.Description Unit PriceQty
12707 8 mm comp. x 8 mm comp. with test point 1-99 £3.81
  100+ £3.43  

Gas Fire Isolation Valve Spares

For use with the gas fire isolation valves above and previous P/Ns 12704 and 12705.
Part No.Description Unit PriceQty
17320 Isolator spares pack as illustrated to the left £0.99

RESTRICTORS

Brass restrictors for gas fire installations, having 1/4" BSP taper female BS 21 inlets, and 8 mm or 12 mm compression outlets. The restrictors are supplied complete with compression nuts and olives. 8 mm and 12 mm gas fire tubes can be found by clicking this link: Gas Fire Tubes. Washers: The washer under the top screw has traditionally been made of red fibre. British Gas specified a bonded seal for this purpose; this is a plated steel washer with rubber-type material bonded to it. The restrictors below have either fibre or PTFE washers unless otherwise stated. All restrictors below are for use with Natural Gas. Only restrictors with bonded seals are for use with LPG. Spares: Spares for restrictors can be found by clicking the following link: Gas Fire Fixing.

1" x 8 mm

with bonded seal
For Natural Gas only, 1" high, 8 mm x 1/4" BSP T F
Part No.Description Unit PriceQty
0251 Chrome plate, gas fire restrictor 1-24 £1.49
  25+ £1.39  
0250 Polished Brass, gas fire restrictor 1-24 £2.27
  25+ £2.05  
8997 Coin bronze, gas fire restrictor 1-24 £2.43
  25+ £2.19  

1" x 8 mm

For Natural Gas only, 1" high, 8 mm x 1/4" BSP T F
Part No.Description Unit PriceQty
1059 Polished brass , gas fire restrictor £1.75

1" x 12 mm

For Natural Gas only. 1" high, 12 mm x 1/4" BSP T F
Part No.Description Unit PriceQty
3814 Chrome plate, gas fire restrictor 1-24 £2.77
  25+ £2.49  

North Thames Pattern

For Natural Gas only. 8 mm X 1/4" BSP T F. 1.3/4" overall length. These restrictors can not be used to isolate gas supply to the appliance.
Part No.Description Unit PriceQty
6006 Chrome plate, gas fire restrictor £8.17
6005 Coin bronze, gas fire restrictor £8.17

Spare Compression Nuts for P/Ns 6005/6
Spare compression nuts for the North Thames restrictors shown here :P/Ns 6005 and 6006.
Part No.Description Unit PriceQty
6016 8 mm coin bronze £0.76
6017 8 mm chrome plate £0.76

1" x 8 mm, Pedestal Elbow

with bonded seal
For Natural Gas and LPG. 1 " high, 8 mm x 1/4" BSP T F.
Part No.Description Unit PriceQty
6108 Chrome plate, gas fire restrictor £2.99

2" x 8 mm

Part No.Description Unit PriceQty
1060 Polished brass1-24 £2.91
  25+ £2.62  
3812 Coin bronze1-24 £3.20
  25+ £2.88  

2" x 8 mm

with bonded seal
For Natural Gas and LPG . 2" high, 8mm x 1/4" BSP T F.
Part No.Description Unit PriceQty
0261 Chrome plate, gas fire restrictor 1-24 £2.96
  25+ £2.67  
1589 Polished brass, gas fire restrictor 1-24 £3.04
  25+ £2.73  
8998 Coin bronze, gas fire restrictor 1-24 £3.40
  25+ £3.06  

2" x 12 mm

For Natural Gas only. May be supplied as a kit. 2" high, 12 mm x 1/4" BSP T F
Part No.Description Unit PriceQty
3816 Chrome plate, gas fire restrictor £11.46

4" x 8 mm

For Natural Gas only. May be supplied as a kit. 4" high, 8 mm x 1/4" BSP T F
Part No.Description Unit PriceQty
6004 Chrome plate, gas fire restrictor £4.92

4" x 12 mm

For Natural Gas only. May be supplied as a kit. 4" high, 12mm x 1/4" BSP T F
Part No.Description Unit PriceQty
6002 Chrome plate, gas fire restrictor £5.63
6001 Coin bronze, gas fire restrictor £6.11

RESTRICTOR KITS

Kits with Fibre/PTFE Washers

Restrictor kits with 1/4" BSP taper female inlet and 8 mm compression outlet. Will produce either a 2" or 4" high assembly as shown below. See fire tubes for 8 mm fire tubes for use with these kits. P/Ns 4826, 4670 include restrictors 1059. P/Ns 0975, 0973, 8999 include restrictors P/Ns 0251, 0250, or 8997 and are suitable for Natural Gas and LPG as these restrictors are fitted with bonded seals (Click here for top screw washers).

For Natural Gas only.
Part No.Description Unit PriceQty
4826 Polished brass restrictor kit 1-24 £4.98
  25+ £4.48  

Part No.Description Unit PriceQty
4670 Coin bronze restrictor kit 1-24 £4.81
  25+ £4.33  

Kits with Bonded Seals

For Natural Gas and LPG
Part No.Description Unit PriceQty
0975 Chrome plate restrictor kit1-24 £4.29
  25+ £3.86  

For Natural Gas and LPG
Part No.Description Unit PriceQty
0973 Polished brass restrictor kit1-24 £5.15
  25+ £4.64  

For Natural Gas and LPG
Part No.Description Unit PriceQty
8999 Coin bronze restrictor kit 1-24 £5.01
  25+ £4.51  

RESTRICTOR ACCESSORIES

A restrictor may be screwed directly to the floor plate or with an extension piece between to give 2" extra height. Collapsible washers (shown below) will conceal the threads. 3/4" woodscrews for securing the floor plate are shown on this page. Spacing discs for use with the floor plates are also shown on this page.

Floor Plates, Brass
1⁄4" x 1⁄4" BSP TM x F

For use with 1" restrictor or extension pieces.
For Natural Gas and LPG.
Part No.Description Unit PriceQty
4933 Chrome plate1-24 £1.27
  25+ £1.14  
0270 Polished brass1-24 £1.39
  25+ £1.25  
3828 Coin bronze1-24 £1.39
  25+ £1.25  

1/4" x 3/8" BSP TM x F

For use with 1" restrictors or extension pieces.
For Natural Gas and LPG.
Part No.Description Unit PriceQty
6012 Chrome plate £4.19
6011 Coin bronze £4.19

3/8" x 3/8" BSP TM x F

For use ONLY with restrictors having a 3/8" T BSP female thread. We no longer sell such restrictors. Will not accept extension pieces or collapsible washers.
For Natural Gas only.
Part No.Description Unit PriceQty
6009 Coin bronze £5.36

Spacing Discs for Floor Plates

Black polypropylene spacing disc for use with floor plates.
Part No.Description Unit PriceQty
2151 Spacing disc £0.73

3/4" Woodscrews for Floor Plates

3/4" long woodscrews for securing floor plates.
Part No.Description Unit PriceQty
3094 Steel, chrome plated wood screw £0.08
3125 Brass wood screw £0.10

Brass Collapsible Washers

Used for concealing the exposed taper thread when assembling a 1" restrictor to a floor plate, and when using an extension piece.
Part No.Description Unit PriceQty
0281 Chrome plated £0.31
0280 Brass finish £0.27
3819 Coin bronze £0.17

Spare Olives

Spare olives for restrictors. For full olive range please click here
Part No.Description Unit PriceQty
2149 8 mm olive £0.18
6749 12 mm olive £0.55

Extension Pieces,
Brass 1⁄4" x 1⁄4" BSP TM x F,
2" Long

To fit between 1" restrictors and floor plates to give added height. The exposed threads may be hidden by using the collapsible washers shown above.
For Natural Gas and LPG.
Part No.Description Unit PriceQty
0291 Chrome plate1-24 £1.05
  25+ £0.95  
0290 Polished brass1-24 £1.20
  25+ £1.08  

Top Screws for Restrictors

Fit all except P/Ns 6005 and 6006.
Part No.Description Unit PriceQty
4667 Coin bronze £0.61
4668 Chrome plate £0.56
4669 Polished brass £0.58

Fit only P/Ns 6005 and 6006.
Part No.Description Unit PriceQty
6014 Coin bronze £2.22
6015 Chrome plate £2.24

Washers for Top Screws

The washer under the top screw has traditionally been made of red fibre. However, in recent years, British Gas plc has specified a bonded seal for this purpose. This is a plated steel washer with rubber-type material bonded to it.
Bonded seals for Natural Gas and LPG
P/N 6013 fits only restrictors P/Ns 6005 and 6006, P/Ns 3305 and 3346 fit all other restrictors.
Part No.Description Unit PriceQty
3305 Fibre washer £0.08
3346 Bonded seal £0.42

Gland Nuts

Spare gland nuts for 8 mm and 12 mm restrictors shown here.
Not suitable for P/Ns 6005 and 6006.
Part No.Description Unit PriceQty
4662 8 mm coin bronze £0.53
4663 8 mm chrome plate £0.46
4664 8 mm polished brass £0.48
4665 12 mm coin bronze £0.80
4666 12 mm chrome plate £0.80

BACKNEE ELBOWS

1/4" BSP M x 15 mm Capillary Female

Brass elbows which may be used to pass the gas supply to the bottom of the floor plate. For example the long arm may be used through floorboards. P/N 0287 has taper thread to BS 21 and P/N 1410 has a long screw parallel thread to BS 21.
For Natural Gas and LPG.
Part No.Description Unit PriceQty
1410 Long arm, long thread £2.36

Part No.Description Unit PriceQty
0287 Short arm, short thread £5.52