Stainless Steel Flexible Gas Pipe GAS SAFE REGISTER TM

STAINLESS STEEL GAS FLEXIBLE PIPE

TracPipe® is a stainless steel, semi-rigid (bendable) corrugated gas pipe with a yellow polyethylene cover. The cover is fire and smoke retardant. Semi-rigid piping has been used in North America for 20 years and Japan for 30 years. TracPipe® and its associated fittings (including Autoflare® connectors) are Kitemarked and Advantica (formerly B G Technology) approved to BS 7838:1996 Corrugated stainless steel semi-rigid pipe and associated fittings for low pressure gas pipework of up to DN50. BS 7838 applies to corrugated pipe and fittings which are suitable for a maximum working pressure of 75 mbar when installed in accordance with BS 6891 or BS 5482 Part 1 in domestic premises, or in accordance with IGE/UP/2 in other premises.

No welding, soldering or threading is needed. An Autoflare® fitting, two spanners, a utility knife and a Tracpipe® ( Click Here ) tube cutter are required to make a join. Also listed below are taper male fittings which allow TracPipe® to be connected to other pipes or fittings. The pipe may be bent by hand, but must NOT be used where repeated bending occurs after installation. For working pressures up to 75 mbar.

Tube Dimensions
size
Nominal ID
Cover OD
Min . Recommended Bend Radius
12 mm
11.2 mm
17 mm
76 mm
15 mm
15.2 mm
22.1 mm
76 mm
22 mm
20.8 mm
28.2 mm
76 mm
28 mm
26.9 mm
35.1 mm
127 mm
32 mm
32.8 mm
42.3 mm
127 mm
40 mm
38.7 mm
48.8 mm
127 mm
50 mm
52.3 mm
65.8 mm
153 mm

TracPipe® Flexible Gas Pipe

Part No.DescriptionUnit PriceQty

TracPipe® Boiler Pipe Replacement Kits

TracPipe® replacement kits are ideal for replacing undersized or damaged copper lines with DN 22, DN 28 and DN 32 stainless steel pipe. Available in 5, 10 and 15 m lengths, complete with two Autoflare® fittings and tape.
Part No.DescriptionUnit PriceQty

TracPipe® Coupling Fittings

To join lengths of TracPipe®.
Part No.DescriptionUnit PriceQty

TracPipe® Tees

To join lengths of TracPipe®.
Part No.DescriptionUnit PriceQty

Autoflare Straight BSP Taper Fittings

To connect TracPipe® to other pipes or fittings
Part No.DescriptionUnit PriceQty

Spare Split Rings for Autoflare fittings

Part No.DescriptionUnit PriceQty

Terminal Mount Fittings

Part No.DescriptionUnit PriceQty

Silicone Tape

Colour : yellow ochre. After pressure testing, this tape must be used to ensure no stainless steel pipe is exposed.
Part No.DescriptionUnit PriceQty



TRACPIPE® CUTTER

The MONUMENT TracPipe® cutter has been designed to cut the Omegaflex Tracpipe® from DN15/15mm to DN32/32mm.

Part No.DescriptionUnit PriceQty



IENOX TUBE CUTTER

LENOX heavy duty telescopic action precision tube cutter used for cutting thin walled metal tubes such as stainless steel and Tracpipe®. From 3 mm to 35 mm tubing. Zinc die-cast body with stainless steel rollers. A deburrer is included in the tool and one spare cutting wheel is fitted in the handle knob.
Part No.DescriptionUnit PriceQty