Gas Meters - Electronic & Turbine GAS SAFE REGISTER TM

E6 ELECTRONIC GAS METER

Electronic gas meter. Small, with no moving parts or diaphragms. Battery powered with minimum battery life 10 years. The battery is included with the meter. The meter has the same 1" BS 746:2005 connection (at the same distance apart) as the standard U6 meter (P/N 8129). It will therefore fit meter brackets and meter boxes which can be found by clicking the following link meter brackets and meter boxes. The meter displays in cubic metres. It is a conventional credit meter which is read from the display, (or through an optical communication port). It is not a pre-paid coin or card operated meter.
Reads in cubic metres.

Maximum flow:6 m ³/hour.
Size: 23.5 cm W x 16.5 cm H x 9 cm D.
Connectors: 1" BS 746:2005 male, 152.4 mm apart.
Weight:2.5 kg approximately.
Maximum Pressure: 75mbar

A meter bracket adaptation is available so that this meter will fit in a semi-concealed meter box. For Natural Gas only.
Part No.Description Unit PriceQty


TURBINE GAS METERS - LIQUID CRYSTAL DISPLAY

TBX Turbine meters give great economies in space and cost compared with a diaphragm meter.


They are ideal for monitoring gas consumption by boilers, burners, furnaces, etc. As well as cumulative flow, the LCD display will also give the actual flow at a given moment. It will also indicate trip flow. The LCD is powered by a lithium battery with an approximate life of seven years; connection to mains electricity is not required.


The meters are for indoor use and may be used for Natural Gas, LPG, nitrogen or air and may be mounted vertically or horizontally. Left to right flow is required for horizontal mounting. The fitting kits for the flanged meters (which need to be bought separately) include two flanges, nuts, bolts, washers and gaskets; the flanges have to be welded to the pipework. Display flow rates as low as 0.5 metres / hour.


Two built-in oscillation systems allow remote meter reading if required. The remote display unit we offer simply plugs into the turbine meter. The lead is 3 metres long.

VELOCITY : As meters read in cubic metres/hour, the gas velocity can be calculated using the internal diameter of the pipe.
PURGING : The instantaneous flow rate reading enables the operator to check that the purge flow rate is continually above the recommended minimum.


P/N 8313. Flow range 4 - 30 m³/hour.
Maximum pressure: 1.0 kgf/cm².
Connections: 1.1/4" BSP taper female.
Length 170 mm, Height 72.5 mm, Width 73 mm
Part No.Description Unit PriceQty

P/N 17555. Flow range 15 - 30 m³/hour.
Maximum pressure: 1.0 kgf/cm².
Pipe connection: 1.1/2" BSP FT
Length 170 mm, Height 72.5 mm, Width 73 mm
Part No.Description Unit PriceQty

P/N 8721. Flow range:10 - 100 m ³/hour.
Maximum pressure: 1.0 kgf/cm².
Connections: 2" BSP taper female.
Length 200 mm, Height 98.5 mm, Width: 85 mm
Part No.Description Unit PriceQty

P/N 15582. Flow range:12.5- 150 m³/hour.
Maximum pressure: 1.0 kgf/cm².
Connections: 2" flanged.
Length 200 mm, Height 148 mm, Width: 155 mm
Part No.Description Unit PriceQty

P/N 16488. Flow range:15- 300 m³/hour.
Maximum pressure: 9.9 kgf/cm².
Connections: 3" flanged.
Length 250 mm, Height 185 mm, Width: 246 mm
Part No.Description Unit PriceQty

Kit comprises: flanges, clamping studs, and gaskets.
Part No.Description Unit PriceQty

Kit comprises: flanges, clamping studs, and gaskets.
Part No.Description Unit PriceQty

Part No.Description Unit PriceQty


TURBINE GAS METERS MECHANICAL DISPLAY

CPT Quantometers

Turbine meters suitable for Natural Gas, LPG (with low pressure drop to comply with the requirements of IGE/UP/2). Bodies manufactured from aluminium. P/N's 17346 and 19140 have a downturn ratio 10 : 1, P/N's 19141/2/3/4/5/6 and 17347/8/9 have a turndown ratio of 20:1. All are IP 65 rated and suitable for internal and external installation, however they must be protected from direct weather influences. The meters can be installed both vertically and horizontally and the index assembly can be rotated through 345º . A low frequency pulse output transmitter is fitted as standard and the meter can be connected to a remote display or BMS. It is recommended that a flange fitting kit be purchased ; these kits comprise PN 16 rated raised face welding flanges bright plated, clamping stud bolts, nuts, washers and asbestos free gaskets.

A self-powered optional remote display unit is in a robust weatherproof (IP 65) ABS box for wall mounting, with 4m cable, P/N 17799 Click Here.

SPECIFICATIONS :
Accuracy : Qmin - 0.2 Qmax < +/- 1.5 % Maximum working pressure : 16 bar
0.2 Qmax - Qmax < +/- 1 % Working temperature range : -10 °C to +60°C

Part No.Bore Size. Flow range m3/hWeight
191402"DN50 CPT G406 - 65 3.6 kg
173462"DN50 CPT G6510 - 1003.6 kg
191412.5"DN65 CPT G655 - 100 5.3 kg
182442.5"DN65 CPT G10010 - 1605.3 kg
191423"DN80 CPT G1008 - 160 5.3 kg
173473"DN80 CPT G16013 - 2505.3 kg
191433"DN80 CPT G25020 - 400 5.3 kg
191444"DN100 CPT G16013 - 2507.4 kg
173484"DN100 CPT G25020 - 4007.4 kg
182434"DN100 CPT G40032 - 6507.4 kg
191456"DN150 CPT G40032 - 650 11.6 kg
173496"DN150 CPT G65050 - 100011.6 kg
191466"DN150 CPT G100080 - 160011.6 kg

Part No.Description Unit PriceQty

Fitting kits