Gas Pressure Test Equipment GAS SAFE REGISTER TM

PRESSURE TEST POINTS

Test point elbows and unions suitable for Natural Gas and LPG. New European regulations require test points on a much wider range of gas appliances. Manufactured in the UK by a BS EN ISO 9001:2000 registered company.

For Natural Gas and LPG.

Test Point Elbows, Brass

Metric

Sizes quoted refer to the outside diameter of the tube which fits the elbow.
Part No.Description Unit PriceQty

Imperial

Sizes quoted refer to the outside diameter of the tube which fits the elbow.
Part No.Description Unit PriceQty

Test Point Nipple, Brass

Test point nipple with 1/8" BSP taper thread.

For Natural Gas and LPG.
Part No.Description Unit PriceQty

Test Tees, Brass

1/4" BSP female end. See page 140, page 141, and page 143, to page 147 for adaptors to attach tees to pipework. If an extra tap is required please order P/N 6252 on page 25.
Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Test Point Unions, Brass

Metric
Sizes quoted refer to the outside diameter of the tube which fits the union.
Part No.Description Unit PriceQty

Imperial
Sizes quoted refer to the outside diameter of the tube which fits the union.
Part No.Description Unit PriceQty

Butterfly Handle Ball Valve Incorporating Test Point.

Butterfly handle ball valve incorporating test point. Suitable for use with most LPG automatic changeover kits.

For Natural Gas and LPG.
Part No.Description Unit PriceQty

15 mm Compression Ball Valve with Test Point, Brass

Screwdriver slot-operated compression ball valve complete with built-in test point.

For Natural Gas and LPG.
Part No.Description Unit PriceQty

22 mm Compression Brass Ball Valve with Test Point

Screwdriver slot or spanner operated compression brass ball valve with built-in test point.
Part No.Description Unit PriceQty

1/2" BSP Parallel M x F Adaptor with Test Point, Brass

Part No.Description Unit PriceQty

1⁄2" BSP M x F, Straight, Nickel Plated Steel Body with Brass Test Point

Part No.Description Unit PriceQty


METER TEST ADAPTOR, BRASS

1" BS 746 M x 1/4" BSP F

A test piece with 1" BS 746 male thread which may be used to block off the gas system at the meter end (screwing it into the meter adaptor, with a washer P/N 2415 on page 35). It has a 1/4" BSP female thread which can then be used for test purposes.
Part No.Description Unit PriceQty


HAND BELLOWS

Hand bellows for pressurising systems for test. P/N 9374 has a serrated end which fits inside the tube. P/N 9403 has a plain bore tube which fits over a suitable nozzle. The tap on P/N 9403 allows air to be released slowly, so adjusting the pressure to the required level (after slightly overpressurising the system).
Part No.Description Unit PriceQty

Part No.Description Unit PriceQty


KANE 3500 SERIES PRESSURE GAUGES

The KANE 3500 range provides accurate and stable pressure and differential pressure reading due to their temperature compensated pressure sensor. Units of pressure : mbar, mmH20, Pa, kPa, PSI, mmHg, hPA and InH20. Supplied with 1 m of tubing, protective rubber boot, pouch type case and a PP3 battery. The 3500 series have an infra-red emitter for use with an optional IR printer (P/N 10416). The models 3500-1 and 3500-2 have timed let-by, stabilization and tightness tests with log facility.

Low Pressure Variant

Part No.Description Unit PriceQty

High Pressure Variant

Part No.Description Unit PriceQty


PRESSURE GAUGES

Digital

The KANE 3100 range provides accurate and stable pressure and differential pressure reading due to their temperature compensated pressure sensor. Units of measure : mbar, mmH2O, Pa, kPa, PSI, mmHg, hPa and InH20. Supplied with 1 metre of tubing, protective pouch, battery and an infra-red emitter for use with an optional IR printer (P/N 10416).

P/N 17914 has timed let-by, tightness and stabilisation tests with log facility.

SPECIFICATIONS :
P/N Kane Model Nominal pressure range Resolution
17914 3100-1 ± 80 mbar 0.001 mbar
17916 3100-5 ± 400 mbar 0.01 mbar
   
DIMENSIONS :
length 170 mm (6.7") x width 70 mm (2.7") x depth 23 mm (0.9")
Weight : 283 g (0.76 lb)
Battery : 1 x PP3 9V, supplied
Part No.Description Unit PriceQty

Differential Pressure Gauge

MAESTER 3005 electronic pressure gauge which measures actual pressure or pressure difference. Switchable between five different pressure units. These are millibars, bar, inches water gauge, mm water gauge, and pounds per square inch. Features include hold, max/min, auto power off and backlight. Supplied with protective rubber boot, 2 x 500 mm lengths of hose, protective pouch and 9 V battery. Reads positive pressure and vacuum. Measurement range: .± 0 to 138 mbar. Resolution 0.1 mbar.
Part No.Description Unit PriceQty


DIGITAL MANOMETERS

OMNITRON digital manometer

The OMNITRON digital manometer gives a digital display of gauge or differential pressure. This model has a selection of 11 pressure units of measure : p.s.i., inH2O, bar, mmHg, oz/in2, kg/cm2, kPa, ftH2O, inHg, cmH2O and mbar. Features include data hold and record, minimum and maximum button, auto power off, low battery indicator and simple fittings for hose connection. Complete with connection hoses, battery and hard carrying case.
SPECIFICATIONS :
Range : 0 to 1.03 bar
Accuracy : +/- 0.3% of full scale at 25 °C
Resolution : 1 mbar
Storage temp. range : -20 °C to 60 °C
Dimensions : 72 mm x 182 mm x 30 mm
Power supply : 1 x 9 V battery
Hoses : 2 x 1000 mm x 6 mm (o.d.) 4 mm (i.d.)
Weight (inc. battery) : 220 g
Part No.Description Unit PriceQty

ANTON APM 130 manometer

ANTON APM 130 measures gauge and differential positive pressure. Backlit for poorly lit conditions. Display hold facility. Optional auto power off after 12 mins. Push button zero. Protective boot with tilt stand. Water resistant (IP 67). Standard hose connections. Domestic tightness testing (IGE/UP/1B). Operating range : -20 to 130 mbar Resolution : 0.01 up to 19.9 mbar, 0.1 20 to 130 mbar. Takes two AA batteries, not supplied. Weight : 419 g.

DIMENSIONS :
height 170 mm x width 77 mm x depth 50 mm.
Part No.Description Unit PriceQty

ANTON APM 150 manometer

ANTON APM 150 measures gauge and differential positive pressure and features 0.1 resolution, measurement range 0 mbar to + 1999 mbar, 7 units of measurement kPa, PSI, inHg, mmHg, inH2O, mmH2O and mbar. Backlit for poorly lit conditions. Smoothing facility for extra stability, display hold facility. Time test facility. Auto power off 12 mins (optional). Records min./max. readings. Push button zero. Protective boot with tilt stand. Water resistant (IP 67). High pressure hose connections, hose not supplied, 6 mm o.d./ 4 mm i.d. required. Medium pressure measurement and strength testing (IGE/UP/1 and 1A). Takes two AA batteries, not supplied. Weight : 419 g.

DIMENSIONS :
height 170 mm x width 77 mm x depth 50 mm.
Part No.Description Unit PriceQty