Caravan Regulators, LPG Valves and Fittings GAS SAFE REGISTER TM

Whilst the maximum capacity of each of the regulators is as stated below, the gas engineer/operative must ensure that the offtake of the cylinders used is adequate for the application/installation.


CARAVAN REGULATOR & FITTINGS

New caravan and motor home regulations. BS EN 1949:2002 requires regulators (to BS EN 12864:2001 Annex D) to be fitted within gas lockers in new caravans and motor homes (from September 2003). P/N 16543 below meets this specification. The other products below are for use with the regulator and gas bottle.

Low Pressure Regulator for Leisure Vehicles

Low pressure requlator designed to comply with BS EN 1949:2002 (EN 12864:2001 Annex D). For touring and motor caravans with appliances operating at 30 mbar. Integral pressure relief valve and test point, 1.5 kg/h, 30mbar operating pressure for propane, butane and LPG mix. Inlet M20 outlet 10mm compression, complete on mounting bracket. Hose P/N 16639, 16852, 16640, or 16853 (below) may be used to connect the regulator to the gas bottle. The M20 thread on the regulator accepts the W20 thread on the hoses. Alternatively 400mm hose P/N 16712 or 1500mm hose 17802 will attach the adaptors (below) to the regulator
Part No.Description Unit PriceQty

Adaptors for Gas Bottles

Adaptors to connect a clip-on or Camping Gaz type gas bottle to the regulator P/N 16543 (above). Hose P/N 16712 or 17802 (below) will be needed to complete the connection. The M20 thread on these valves accepts the W20 thread on the hose. The Camping Gaz item P/N 16643 is fitted with an on-off valve, clip-on items are not. Other bottles, with threaded propane or butane connections, need hose P/N 16639, 16852, 16640, or 16853 (below), which run directly from the bottle to the regulator.

Inlet and outlet connections
Clip-on : Clip-on - M20 x 1.5
Camping Gaz : M16 x 1.5 - M20 x 1.5
Part No.Description Unit PriceQty

Hose Assemblies

High pressure black hose to (and marked) BS 3212 : Type 2. 6.3 mm i.d., 15.5 mm o.d., 17.5 bar working pressure, 52 bar burst pressure. Unbraided. A self adhesive advisory label is attached to every hose. N/R indicates a non-return/excess flow valve. P/Ns 16639, 16852, 16640 and 16853 connect directly from the bottle to the regulator above. P/Ns 16712 and 17802 connect from the adaptors above to the regulator above.

For propane only.
Part No.Description Unit PriceQty

For butane only.
Part No.Description Unit PriceQty

For propane or butane only.
Part No.Description Unit PriceQty


1/4" SOLENOID OPERATED GAS SAFETY SHUT-OFF VALVES

12 V DC or 240 V AC. 1/4" BSP for LPG or Natural Gas. Normally closed valve which is held open by electric current. Power interruption closes the valve; power supply opens the valve. It can be electrically connected to an alarm system and/or a knock-off switch. May be mounted in any orientation, provided direction of flow agrees with arrow on body.
Note: The knock-off switches P/N 8936 and 13559 maybe used with either of these valves. For these items please click the following link: Knock off switch.

SPECIFICATION: Protected to IP 65 with connector fitted (connector is supplied).
Max. ambient temperature: 60 °C
Pressure range: P/N 6898 0-0.1 bar
(100 mbar, 1.47 p.s.i.)
P/N 6899 0-2 bar (29 p.s.i).
Nominal bore: 4 mm.
Threads: 1/4" BSP parallel F x F.

For Natural Gas and LPG
Part No.Description Unit PriceQty


AUTOMATIC CUT-OFF VALVE

Automatic cut-off valve for use with propane or butane. Quick acting quarter turn shut-off. Must be placed in gas line between regulator and appliance. Detects loss of pressure or excess flow. Cuts off gas supply to appliance automatically and can only be re-set manually. A cut-off valve of this type is mandatory on all British fishing vessels over 10 metres long using LPG. 3/8" BSP connections.
Part No.Description Unit PriceQty


MULTI-PURPOSE SAFETY FITTING

A multi-purpose fitting which performs three safety functions. It is an excess flow valve which shuts off the gas if for example a pipe on the outlet side is cut (manual reset is required). It enables a leak test to be carried out. It also gives an indication of the cylinder's content.
Inlet: Male POL + 5/8" LH.
Outlet: Female POL + 5/8" LH.
Will fit directly to a propane bottle.
Part No.Description Unit PriceQty


WALLBLOCKS AND PROPANE FITTINGS

Single Wall Block

Part No.Description Unit PriceQty

Double Wall Block

Part No.Description Unit PriceQty

Tee Piece

For use with four packs.
Part No.Description Unit PriceQty

Nut and Tail

Part No.Description Unit PriceQty

Y POL Tee

M x F x F POL to enable two propane outlets to be taken off one cylinder
Part No.Description Unit PriceQty

POL Extended Tee

Part No.Description Unit PriceQty

POL Connector Pol x 1/4" BSP M

Part No.Description Unit PriceQty

Spanners

Spanners to fit POL nuts as found on the cylinder end of pigtails and also on P/Ns 8800, 8801, 8803, 8810, 8811, 8812 and 9308. Also fit butane nuts on P/Ns 8807 and 8808. Please click here to view these items.
P/N 11724 is pressed steel, zinc plated.
P/N 11725 is black forged steel.
Part No.Description Unit PriceQty

Washer

Part No.Description Unit PriceQty


GAS SEALANT

A non-setting gas sealant for threaded connections on gas appliances. ROCOL RAS non-setting gas sealant 300 gms. Recommended applications include Natural Gas, propane, butane and town gas. Not for LPG in liquid form. A low pressure sealant. Maximum pressure 200 mbar (2.5 p.s.i.)
Part No.Description Unit PriceQty