LPG - Tank & Test Equipment GAS SAFE REGISTER TM

The installation kits P/N 16533 and 16534 (see below) can be used together to install a domestic LPG tank of up to 2 tonne (4400 litres). The only additional items required are 2 x PVC formed bends (P/N 11060), 2 m long GRP riser sleeve (P/N 11058) and the required length of MDPE yellow polyethylene pipe. Please click here and here for these items

HOUSE END INSTALLATION KIT
Content :
house end bracket
25 mm x ¾" pushfit adaptor
   c/w white plastic ‘C’ clip,
   GRP nut and test point
¾" ball valve F x F EN 331
¾" hollow plug
emergency control plaque
TANK INSTALLATION KIT
Content :
Type 511 combination 1st and 2nd stage
   UPSO/OPSO 10kg/hr regulator c/w copper olive ½" BSP TM x 10 mm stud adaptors x 2
1.2 m x 10 mm straight copper pipe
¾" x ½" reducing socket
1 m long ¾" pipe (medium gauge)
25 mm x ¾" George Fischer Primofit elbow
¾" pipe bracket, tank mounting
Part No.Description Unit PriceQty

LPG Tank Equipment


Earthing Rod Kit

Comprises a galvanised steel pointed rod (10 mm dia. x 0.75 m long), 2 m of earthing cable with a lug at each end, and two plated nuts to secure the cable to the rod.
Part No.Description Unit PriceQty

Level Gauge

Level gauge for LPG tank. May be mounted in horizontal or vertical position.
Part No.Description Unit PriceQty



LPG ELECTRONIC TANK LIQUID LEVEL MONITOR

The WATCHMAN is an electronic monitor that allows you to check the level inside your LPG storage tank from inside your office or home. A gauge is fitted onto the LPG tank, which senses the level of LPG. Its small transmitter (battery supplied) sends this information out by regular radio signals up to 1,000 metres away. The Watchman receiver is plugged into an electrical mains socket and the visual display shows liquid level. The level is shown in tenths and a red light pulses when the level is low.
Part No.Description Unit PriceQty

For MDPE Through Wall Fittings please click here