Oil-De-aerator, Valves, Tigerloop, Test Pumps, Gauges, etc. GAS SAFE REGISTER TM

DE-AERATOR

The GS Pro-Fi 3 combines a fuel filter and a de-aeration device with filter and shut off valve in one quick to install module. Suitable for internal installations as the device does not vent to atmosphere. Meets OFTEC OPS 23 (GB): 11-2007 requirements.

SPECIFICATIONS :
Max. oil throughput in pump cycle : 80 l/h light oil
Max. oil throughput at burner jet : 120 l/h light oil
Max. pressure : 16 bar
Max. operating temperature : 80 °C
Max. ambient temperature : 80 °C
Max. de-aeration capacity : 5 l/h air
Pipework connections : 3⁄8" BSP
Part No.Description Unit PriceQty

De-aerator Fitting Kit

Two pipe installation/flare fitting kit for use with an oil pressure jet burner and a GS 2000 de-aerator with integral filter (P/N 18800).

CONTENTS :
1 x mini ball valve 1⁄4" BSP F,
2 x 750 mm long life oil hose,
1⁄4" BSP T male x 1⁄4" BSP male swivel elbow,
1 x 10 mm flare x 1⁄4" BSP T male adaptor,
3 x 10 mm flare x 3⁄8" BSP T male adaptor,
1 x 10 mm flare x 1⁄4" BSP female adaptor,
5 x 10 mm flare nut.
Part No.Description Unit PriceQty



MINI BALL VALVES

BSP Parallel F x F

Brass body with plated finish ; black handle. For oil.

Temperature range: -20 °C to 90 °C.
Maximum pressure : 15 bar at ambient temperature.
Part No.Description Unit PriceQty



OIL LIFTER

Oil lifter for use on domestic oil installations when higher than normal lift is required, or for supplying oil to appliances which have no oil pump and require a gravity feed oil supply.
SPECIFICATIONS :  
Pump type : suction solenoid pump
Max. lifting height : 8 m vertical (8 mm i.d. tube)
Max. distance : 100 m horizontal (8 mm i.d. tube)
Outlet flow rating : 8 l/hr @ 8 m vertical/25 m horizontal (8 mm i.d. tube)
  15 I/hr @ 5 m vertical/25 m horizontal (8 mm i.d. tube)
Inlet connection : 3⁄8" F BSP
Outlet connection : 3⁄8" F BSP
Overflow outlet connection : 1⁄2" F BSP
Power supply : 230 V, 50 Hz
Power consumption : 50 W
Reservoir capacity : 3.5 litres
Fuel type : Kerosene and diesel oil
Weight : 3 kg
Dimensions : 240 mm wide x
  125 mm deep x
  300 mm high
Part No.Description Unit PriceQty



TANKTOP OFF-TAKE SYSTEM

The Tanktop off-take system features diaphragm anti-siphon valve (factory set), anti spill valve, non-return valve, 50 micron filter, silicone suction tube, floating suction head, purging/ priming button, tank inlet fitting 1" BSP, surface gasket and is weatherproof for external use. Suitable for all heating oils.

SPECIFICATIONS :
Max. tank height : 2 m
Max. negative head : marked on valve (factory set from 0 - 6 m)
Max. flow : 25 litres per hour
Max. vacuum : -1 bar (-14.5 psi)
Tank fitting : 1" BSP parallel male, with sealing gasket
Outlet fitting : 3⁄8" BSP parallel female
Height : 105 mm
Max. dia. : 82 mm
Part No.Description Unit PriceQty

Tanktop Filter Service Kit

Suitable for serving P/N 19666.
CONTENTS :
2 x replacement viton ‘O’ rings, 1 x 50 micron filter element.
Part No.Description Unit PriceQty



CHECK VALVE

3/8" F x F check Valve for oil, Brass.
To prevent Back Flow on high level boiler installations. Brass with viton seat seal.
Part No.Description Unit PriceQty



OIL LINE PRESSURE TEST PUMP KIT

The pump enables the installer to carry out a pressure test on the oil pipework, before commissioning an oil firing installation. Kit consists of : hand pump, pressure limiter to 4 bar test pressure, test pressure gauge : range 0 - 6 bar, connecting hose : 400 mm long, end connectors 8 mm tube x union nut M14 x 1.5, carrying case.
Part No.Description Unit PriceQty



TIGERLOOP

Tigerloop

The TIGERLOOP is an oil de-aerator which allows the remote tank to be lower than the burner. It has improved de-aeration capacity (8 l/h), float system and built-in overpressure valve (opens at 0.8 bar).

Complete with mounting bracket.
(Fitting kit supplied separately ; see below)
Part No.Description Unit PriceQty

Tigerloop Combi

The TIGERLOOP COMBI is as P/N 13084 above, but with a built-in high flow oil filter. The same fitting kit (see below) may be used.


Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Tigerloop Bio

The TIGERLOOP Bio is compatible with standard mineral fuels like C2 kerosene and Class D gas oil (BS 2869 : 2006) and also bio liquids produced to BS EN 14213: 2004 and bio-liquid/ mineral fuel blends. Constructed externally of metal, suitable for indoor and outdoor installation. OFTEC certified, OPS23: 2009. All connections including air vent : 1⁄4" BSP.
Part No.Description Unit PriceQty

Tigerloop Fitting Kit

Fitting kit for P/Ns 13084 and 17833 above.

CONTENTS:
2 x flexileads 1 m x 1/4" BSP F x 1/4" BSP F
1 x 1/4" BSP x 10 mm compression isolating valve
4 x 1/4" BSP x 10 mm compression studs
2 x 1/4" BSP M x 1/4" BSP M nipples
Part No.Description Unit PriceQty

Tigerloop Flare Fitting Kit

Two pipe installation/flare fitting kit for use with an oil pressure jet burner and a Tigerloop (P/N 13084 or 17833).

CONTENTS :
1 x mini ball valve 1⁄4" BSP F x F,
2 x 750 mm long life oil hose,
1⁄4" BSP T male x 1⁄4" BSP male swivel elbow,
4 x 10 mm flare x 1⁄4" BSP T male adaptor,
1 x 10 mm flare x 1⁄4" BSP female adaptor,
5 x 10 mm flare nut.
Part No.Description Unit PriceQty



OIL PRESSURE REGULATOR

For use on installations where the ‘head’ of oil is too high for the appliance. Ideal for use on installations of stoves or cookers.
Inlet pressure : 0.5 - 6 bar
Outlet pressure : 100 mbar
Connections : 10 mm x 10 mm compression
Part No.Description Unit PriceQty



OIL LINE SUCTION PUMP

For use on new or old systems which are not self priming. Especially useful during modifications or commissioning.

• Pumps on the ‘push’ and the ‘pull’ stroke to prime the system with oil more easily and quickly.
• Unit has a suction hose for connecting to the GS Pro-Fi 3 de-aerator (P/N 18800, above).
• Unit has a discharge flexible hose for draining excess oil into a basin.
• Maximum suction -0.8 bar. Capacity per stroke 400 ml.
Part No.Description Unit PriceQty



KANE OIL SMOKE TEST PUMP

Manual smoke test kit for testing oil fired boilers. Supplied wth filter paper, smoke density chart and carry case.
Part No.Description Unit PriceQty



BRIGON OIL SMOKE TEST PUMP

BRIGON smoke test pump kit for testing oil fired boilers. Supplied with a pack of 40 filter papers and smoke density chart.
Part No.Description Unit PriceQty



TESTO MANUAL OIL SMOKE TEST PUMP

TESTO manual smoke test pump kit for testing oil fired boilers. Supplied with a pack of 40 filter papers and smoke density chart.
Part No.Description Unit PriceQty



TESTO 308 DIGITAL SMOKE TESTER

TESTO 308 digital smoke tester gives digital smoke number measurement to one decimal place, with constant sampling over one minute. High accuracy as the filter paper is continuously heated during sampling. Backlight display and rechargeable battery, mains unit and carrying case. Battery can be charged within the tester using the mains unit. Mains operation of the tester possible using the mains unit.

SPECIFICATION :
Sensor : photo diode
Measuring range : 0 to 6 RZ
Resolution : 0.1 RZ
Accuracy : +/- 0.2 RZ
Operating temp : 0 to +40°C
Dimensions : 270 x 63 x 120mm
Weight : 600g (including battery)
Gas sampling : stainless steel probe 220mm, rubber hose 100mm
Part No.Description Unit PriceQty



TESTO OIL FLUE GAS ANALYSER

TESTO 327-1 O2 flue gas analyser for boiler servicing, for use with kerosene, light and heavy oil, LPG and Natural gas. Measures O2, efficiency, differential temperature and differential pressure. Simple menu and fast 30 second set up time. Robust and shockproof case. IRDA interface to TESTO infrared printer (P/N 15715 see page 51 of our catalogue). Independently tested to EN 50379-2: 2004. Supplied complete with flue gas probe (180mm x 6mm diameter), rechargeable battery, mains unit, and carrying case. Battery can be charged within the tester using the mains unit. Mains operation of the tester possible using the mains unit.

SPECIFICATION :
Temperature : -40 to 600°C.
Draught/pressure : P1 +/- 40mbar, P2 +/- 200mbar.
O2 : 0 to 21 Vol. %.
CO2 : 0 to 4,000ppm (calculated)
Part No.Description Unit PriceQty



OIL PRESSURE TEST KIT

The oil pressure test kit contains both pressure and vacuum gauges and all the fittings to enable the installer to set up or commission the burner oil pressure correctly. Complete with carrying case.

CONTENTS:
1 x pressure gauge manifold
1 x 0 - 300 p.s.i. glycerine filled pressure gauge
1 x compound gauge (pressure and vacuum)
1 x 1/8" female x 1/8" female x 170mm high pressure hose
1 x 1/8" male x 1/8" male taper adaptor
1 x 1/8" male x 1/8" female adaptor
Part No.Description Unit PriceQty



OIL PRESSURE GAUGE

Gauge for measuring oil pressure, 0 - 300 psi, glycerine filled, metal case with 63 mm diameter dial, 1⁄8" BSP bottom entry connection.
Part No.Description Unit PriceQty



PRESSURE/VACUUM GAUGE

Combined pressure/vacuum gauge for use by oil technicians in commissioning and checking oil boiler/burner fuel pump installations. For use with both kerosene and gas oil.

SPECIFICATION :
Pressure range : 0 to 1.5 bar (22 psi)
Vacuum range : 0 to -1 bar (-14.5 psi)
Type :                glycerine
Dial size :            63 mm diameter
Connection :      1⁄8" BSP bottom entry
Case :                 stainless steel
Glass :               shatterproof methacrylate
Part No.Description Unit PriceQty



ALUMINIUM IN-LINE OIL FILTERS

P/Ns 10818 & 10819 are fitted with cleanable nylon filters to trap coarse particles; they are usually fitted near the oil tank.

P/Ns 16409 & 16410 are fitted with replaceable 15 micron paper filters to trap finer particles; they are usually fitted near the appliance.
Part No.Description Unit PriceQty



OIL FILTER & ISOLATING VALVE

For use on bottom take off connections on steel or plastic domestic heating oil tanks. Aluminium body with steel filter bowl giving easy access to cleanable nylon filter. Connections : In : 1" BSP T M union. Out : 10 mm compression with copper olive.
Part No.Description Unit PriceQty

FOR FLUE SYSTEMS FOR OIL PLEASE CLICK HERE