Spill, Pump & Test Equipment


OIL SPILL KIT

A kit to clean up minor oil spillages of up to 15 litres, particularly during deliveries. Suitable for tankers, diggers, construction and agricultural vehicles, workshops and factories. Kits meet requirements of Road Traffic Act Regulations 1992, which state that a quantity of absorbent material must be available as a contingency against spills during the delivery of petrol.

CONTENTS :
10 pads to soak up oil
2 socks to absorb oil
1 disposable bag and tie
Complete with instructions, report form and storage bag.

	Part No.	Description		Unit Price	Qty
	16413	Oil spill kit, 15 litre		£14.82


BATTERY OPERATED SYPHON

Cordless syphon pump with single button operation suitable for pumping most liquids including water, oil, beer, wine, petrol or any non-corrosive fluid. Requires 2 x D size batteries (not supplied).

Outlet hose :	640 x 14 mm dia.
Pump overall length :	640 mm.
Max. flow :	6 l/m.
Weight :	200 g.

	Part No.	Description		Unit Price	Qty
	20561	Syphon pump, cordless		WAS £15.97 NOW £14.95


OIL EXTRACTION VACUUM PUMPS

The oil extraction vacuum pump is ideal to empty drip trays, tank cabinets, bunds or to suck up fuel spills, water or oil. Can be stored at the fill point/tank or in the fill point cabinet. To use prime the handle and suck up the fluid automatically. When full, remove the top plug to pour out the contents.
P/N 20788 is bi-directional so can pump empty its own tank.

Part No.	Description	Unit Price	Qty
20786	2.7 litre vacuum pump	£30.69
20787	6 litre vacuum pump	£58.13

	Part No.	Description		Unit Price	Qty
	20788	6 litre bi-directional pump		£96.75


DRILL PUMP FOR OIL

Useful accessory for emptying all types of oil tanks. Suitable for use with biofuels, diesel and kerosene. Suction up to 2.5 m. Flow rate up to 60 litres/min, depending on type of drill used. Hose connection 22 mm (hose not supplied).

	Part No.	Description		Unit Price	Qty
	20373	Drill pump for oil		£78.75


STORAGE TANK TRANSFER PUMP

Ideal to empty the contents of old fuel storage tanks quickly and can also be used to pump the fuel back in. Suitable for transferring diesel and biofuels up to B30. 125 ltr/min. pumping speed. 1" hose connection (hose not supplied). Unlike vane pumps which are prone to jamming, these pumps offer trouble free oil transfer if not run dry.

	Part No.	Description		Unit Price	Qty
	20376	Storage tank transfer pump		£228.81

Oil hose kit with quick release couplings for use with transfer pump P/N 20376.
Kit contains 5 m suction hose with quick release coupling, check valve and strainer, 5 m delivery hose with quick release couplings, plugs and cap to prevent drips/spills.

	Part No.	Description		Unit Price	Qty
	19269	Transfer pump hose kit		£123.75


UNIVERSAL OIL PUMP

Fuel oil pump with solenoid coil suitable for use as a replacement on the majority of domestic oil burners. The pump features reversible rotation without removing the cover, selectable left or right hand nozzle port and one or two pipe system configuration.

	Part No.	Description		Unit Price	Qty
	16393	Universal oil pump		£57.40


OIL LINE PRESSURE TEST PUMP KIT

The pump enables an installer to pressure test the oil pipework before commissioning an oil installation.
KIT CONTENTS : hand pump, 4 bar pressure limiter, 6 bar pressure gauge, 400 mm long hose with 8 mm tube end for system connection and carry case.

	Part No.	Description		Unit Price	Qty
	17898	Oil line pressure test pump kit		£126.56


PRESSURE GAUGE MANIFOLD

Used in conjunction with a pressure or vacuum gauge for testing pumps on oil burners. Protects the gauges used with it against surges of pressure on initial tests.

	Part No.	Description		Unit Price	Qty
	20374	Pressure gauge manifold		£20.70


OIL PRESSURE GAUGE

Gauge for measuring oil pressure, 0 - 300 psi, glycerine filled, metal case with 63 mm diameter dial, 1⁄8" BSP bottom entry connection.

	Part No.	Description		Unit Price	Qty
	18582	0 - 300 psi oil pressure gauge		£20.32


PRESSURE/VACUUM GAUGE

Combined pressure/vacuum gauge for use by oil technicians in commissioning and checking oil boiler/burner fuel pump installations. For use with both kerosene and gas oil.

SPECIFICATION :
Pressure range :	0 to 1.5 bar (22 psi)
Vacuum range :	0 to -1 bar (-14.5 psi)
Type :	glycerine
Dial size :	63 mm diameter
Connection :	1⁄8" BSP bottom entry
Case :	stainless steel
Glass :	shatterproof methacrylate

	Part No.	Description		Unit Price	Qty
	17779	Pressure/vacumm gauge		£27.45


OIL PRESSURE TEST KIT

The oil pressure test kit contains both pressure and vacuum gauges and all the fittings to enable the installer to set up or commission the burner oil pressure correctly. Complete with carrying case.

CONTENTS:
1 x pressure gauge manifold
1 x 0 - 300 p.s.i. glycerine filled pressure gauge
1 x compound gauge (pressure and vacuum)
1 x 1/8" female x 1/8" female x 170mm high pressure hose
1 x 1/8" male x 1/8" male taper adaptor
1 x 1/8" male x 1/8" female adaptor

	Part No.	Description		Unit Price	Qty
	16296	Oil pressure test kit		£67.92


BRIGON OIL SMOKE TEST PUMP

BRIGON manual smoke test pump kit for testing oil fired boilers. Supplied with a pack of 40 filter papers, smoke density chart.

Part No.	Description	Unit Price	Qty
17900	Brigon smoke test pump	£86.90
17901	Spare smoke test pump filter paper, pack of 80	£13.69


TESTO MANUAL OIL SMOKE TEST PUMP

TESTO manual smoke test pump kit for testing oil fired boilers. Supplied with a pack of 40 filter papers and smoke density chart.

Part No.	Description	Unit Price	Qty
17393	Testo oil smoke test pump	£113.28
17886	Spare smoke test pump filter paper, pack of 40	£6.05


TESTO 308 DIGITAL SMOKE TESTER

TESTO 308 digital smoke tester gives digital smoke number measurement to one decimal place, with constant sampling over one minute. High accuracy as the filter paper is continuously heated during sampling. Backlight display and rechargeable battery, mains unit and carrying case. Battery can be charged within the tester using the mains unit. Mains operation of the tester possible using the mains unit.

SPECIFICATION :
Sensor :	photo diode
Measuring range :	0 to 6 smoke number
Resolution :	0.1 smoke number
Accuracy :	+/- 0.2 smoke number
Operating temp :	5 to 45°C
Dimensions :	270 x 63 x 120 mm
Weight :	600g (including battery)
Gas sampling :	stainless steel probe 220 mm, rubber hose 100 mm

Part No.	Description	Unit Price	Qty
18810	TESTO 308 digital smoke tester	£318.40
18994	Soot filter roll, spare, pack of 8	£18.53


NOZZLE TOOL

Monarch C-201 nozzle tool with 12 point broached socket. Fits all style and length of nozzle bodies with either 11⁄16" or 3⁄4" hexagons.

	Part No.	Description		Unit Price	Qty
	21380	Nozzle tool		£56.00


APPLIANCE CLEANER
Expel ‘C’ Chemical Cleaner

Expel ''C'' is a tube of chemicals that produce non-corrosive gases that breakdown carbon and soot, then expel them from the appliance through the flue (Do not use with plastic or low level flue systems).
Tubes required per appliance :
1 up to 100,000 Btus,
2 up to 400,000 Btus,
+1 extra per 250,000 Btus.

	Part No.	Description		Unit Price	Qty
	21378	Expel ‘C’ Cleaner		£5.30


ELECTRONIC TRANSFORMER

Fits on an oil pressure jet burner. Price includes the lead. Direct replacement for Danfoss EBI. Secondary voltage15 kV

	Part No.	Description		Unit Price	Qty
	12768	EZW230/4 Electronic Transformer		£22.40


TESTO OIL FLUE GAS ANALYSER

TESTO 327-1 O2 flue gas analyser for boiler servicing, for use with kerosene, light and heavy oil, LPG and Natural gas. Measures O2, efficiency, differential temperature and differential pressure. Simple menu and fast 30 second set up time. Robust and shockproof case. IRDA interface to TESTO infrared printer (click here for P/N 20009). Independently tested to EN 50379-2:2004. Supplied complete with flue gas probe (180mm x 6mm diameter), rechargeable battery, mains unit, and carrying case. Battery can be charged within the tester using the mains unit. Mains operation of the tester possible using the mains unit.

SPECIFICATION :
Temperature :	-40 to 600°C.
Draught/pressure :	P1 +/- 40mbar, P2 +/- 200mbar.
O2 :	0 to 21 Vol. %.
CO2 :	0 to 4,000ppm (calculated)

	Part No.	Description		Unit Price	Qty
	18866	Testo 327 oil flue gas analyser		£405.00