Commercial ‘Pre-Rinse’ Spray Systems

AQUAJET allows the commercial kitchen operators to 'pre-rinse' soiled plates prior to loading into the dishwashers. Due to the abuse the equipment takes there is a need for high quality and heavy duty robust component parts in the construction of these systems.

Key areas include heavy duty cross head tap design, spray gun with protection buffer, secondary spring protector strengthening the flexible hose attachment, stainless steel braided inner hose protecting the hose itself from splitting in use, and an outer support spring.

The system features chrome plated construction, insulated gun handle, integrated adjustable gun hook, bonded hose end fittings reducing the possibilities of breakage, extra long adjustable wall bracket to suit all installation situations, lever and bowl options, with a variety of swivel spout lengths, all metal external threads and U.K. water connection design, complete with back nuts. Spray gun, hoses, etc., are generally interchangeable with other manufacturers' (T & S and DIEPAT) components.

PLEASE NOTE: Hot and cold water supplies must be balanced, with an operating pressure between 1.5 bar and 5 bar. A water pressure below 1.5 bar will affect the performance of the pre-rinse..

Click this link to view PDF diagram - size 32K (requires acrobat reader)
The diagram illustrates P/N 13786 Aquajet AJPR10 pre-rinse spray with P/N 13791 optional bowl-filling faucet, BF3.



PRE-RINSE SPRAYS

Deck-mounted Aquajet Pre-rinse Sprays

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Wall-mounted Aquajet Pre-rinse Sprays

P/Ns 18232 and 18233 are pre-assembled and tested, ready for quick installation. Built-in restraining device with easy clean casing and hose. Excellent spray pattern from large bore hose. Valved 1⁄2" BSP F inlet. Hose extends between 800 mm and 1120 mm. P/N 18233 Aquajet AJ-PR50W has an energy-saving construction which uses less than 6 litres/min. of water at 4 bar pressure with the water saving face plate.
Part No.Description Unit PriceQty



OPTIONAL BOWL FILLING FAUCETS

When adding a faucet ro a pre-rinse system the overall height will increase by 150mm. To ensure spray gun is at the optimum position a 350 mm RiserTube (click here for P/N 13796 ) should be purchased to replace the 500mm supplied with the above or in an existing system.
Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty



BOWL FILLING FAUCET SPARES

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty

Part No.Description Unit PriceQty