Isolating & Service Valves


STOP COCKS
Compression

Compression stop cocks to BS 1010-2: 1973. Materials as specified. Compression x compression

DZR Stop Cocks

Part No.	Description	Unit Price	Qty
7547	15 mm	£4.83
7548	22 mm	£4.82

Gunmetal Stop Cocks

Part No.	Description		Unit Price	Qty
8178	15 mm	1-49	£4.64
	15 mm	50+	£4.18

Brass Stop Cocks

Part No.	Description		Unit Price	Qty
8175	15 mm	1-24	£2.72
	15 mm	25+	£2.44
8176	22 mm		£6.46
8177	28 mm		£13.65


BSP F x BSP F

To BS 1010-2: 1973. BSP female threads. Brass.

Part No.	Description	Unit Price	Qty
10480	1/2" F x F	£3.35
10481	3/4" F x F	£7.16


JG SPEEDFIT Push-fit Connectors

To BS 1010-2: 1973. Push-fit connectors at both ends. Brass

Part No.	Description	Unit Price	Qty
15827	15 mm	£6.12
15828	22 mm	£10.05


POSSI VALVE™
The POSSI VALVE™ is a triple function 15 mm stop tap, pressure reducing and filtration valve all in one. It will automatically reduce any input pressure (up to 6.5 bar) down to 2 - 3 bar without any pre-adjustment. If the input pressure is below 2 - 3 bar there will be no restriction to the outward pressure.


Compression x Compression

Part No.	Description		Unit Price	Qty
16677	15 mm x 15 mm		£17.89


Compression x MDPE

Part No.	Description	Unit Price	Qty
16678	15 mm x 20 mm	£20.03
16679	15 mm x 25 mm	£21.94


BIB COCKS
DZR Bib Cocks with Double Check Valve.

With drainage/test point. Threads BSP parallel male. ½" is WRAS approved.

Part No.	Description		Unit Price	Qty
8768	1/2"complete with hose union tail	1-24	£5.34
	1/2"complete with hose union tail	25+	£4.80
7549	3/4" complete with hose union tail		£10.83


Brass Bib Cocks

Threads BSP parallel male. To BS 1010-2: 1973.

Part No.	Description		Unit Price	Qty
9317	1/2" complete with hose union tail	1-24	£3.08
	1/2" complete with hose union tail	25+	£2.16
9318	3/4"complete with hose union tail		£8.12
9319	1/2" loose hose union only		£0.53
9320	3/4"loose hose union only		£1.10


SLUDGE COCKS

Sludge cocks made from DZR (dezincification resistant brass).

Part No.	Description	Unit Price	Qty
7545	15 mm x 15 mm compression	£6.37
7546	22 mm x 22 mm compression	£9.31


WATER SYSTEM DRAIN COMPONENT

Drain valve for water for boilers and manifolds, with ring nut and closing cap with plastic junction drain valve cover.

Part No.	Description		Unit Price	Qty
13180	1/2" system drain component		£4.72


ISOLATING VALVES
Used in hot or cold water systems to isolate part of the system : avoids the need to drain down the whole system to carry out work. Compression fitting at each end. Made in brass, chrome-plated if required.


Screwdriver Operated

Part No.	Description		Unit Price	Qty
10405	15 mm x 15 mm chrome-plated	1-49	£0.88
	15 mm x 15 mm chrome-plated	50+	£0.64
10406	15 mm x 15 mm brass finish	1-49	£0.85
	15 mm x 15 mm brass finish	50+	£0.62
10407	22 mm x 22 mm chrome-plated	1-49	£2.04
	22 mm x 22 mm chrome-plated	50+	£1.63
10408	22 mm x 22 mm brass finish		£2.04


Lever Operated

Blue Handle

Part No.	Description		Unit Price	Qty
10409	15 mm x 15 mm chrome-plated, blue handle	1-49	£1.25
	15 mm x 15 mm chrome-plated, blue handle	50+	£0.79
10410	15 mm x 15 mm brass finish, blue handle	1-49	£1.25
	15 mm x 15 mm brass finish, blue handle	50+	£0.90

Red Handle

Part No.	Description		Unit Price	Qty
10477	15 mm x 15 mm chrome-plated, red handle	1-49	£1.26
	15 mm x 15 mm chrome-plated, red handle	50+	£0.80
10478	15 mm x 15 mm brass finish, red handle	1-59	£1.15
	15 mm x 15 mm brass finish, red handle	50+	£0.83


With Drain Off - Screwdriver Operated

Part No.	Description	Unit Price	Qty
11046	15 mm x 15 mm brass finish	£6.01
10966	22 mm x 22 mm brass finish	£10.65


Self Cutting - Screwdriver Operated

For connecting appliances and additional pipework to existing 15mm pipe, with a built-in screwdriver-operated isolating valve.

Part No.	Description		Unit Price	Qty
17035	15 mm self-cutting isolating valve		£3.64


PUSH-FIT ISOLATING VALVES

Brass nickel plated push-fit isolating valves suitable for hot or cold water. For copper or plastic pipes. Fully inserted pipe inserts to suit the pipe must be used on all installations when using plastic pipe. Maximum pressure : 16 bar.


Straight

Part No.	Description		Unit Price	Qty
19527	15 mm push-fit screwdriver operated		£1.62

Part No.	Description	Unit Price	Qty
19528	15 mm push-fit, blue handled	£1.68
19529	15 mm push-fit, red handled	£1.68
19119	Release tool	£0.30


SERVICE VALVES
Used in hot or cold water systems to isolate part of the system; avoids the need to drain down the whole system to carry out work. Operated by a screw driver slot. Compression one end with a swivelling union nut at the other for connection to taps, etc. Supplied with washer. Made in brass, chrome-plated.

Part No.	Description		Unit Price	Qty
10403	15 mm x 1/2" union, straight	1-49	£1.05
	15 mm x 1/2" union, straight	50+	£0.95
7489	22 mm x 3/4" union, straight		£2.81

Part No.	Description		Unit Price	Qty
10404	15 00 x 1/2" union, angled	1-49	£1.20
	15 00 x 1/2" union, angled	50+	£1.08


Washers

Part No.	Description	Unit Price	Qty
11472	Red fibre 1/2" service valve / tap connector washers, pack of 10	£0.35
11473	Red fibre 3/4" service valve / tap connector washers, pack of 10	£0.43


ISOLATING & SERVICE VALVES WITH JG SPEEDFIT CONNECTORS
Brass nickel-plated valves with JG SPEEDFIT connectors, for copper or plastic pipe. Suitable for hot or cold water. Fully inserted pipe inserts (click here for these) must be used on all installations when using JG SPEEDFIT connectors on plastic pipe.


Isolating Valves

Screwdriver operated service valve for hot or cold services. Brass, nickel plated.

Part No.	Description	Unit Price	Qty
15829	15 mm, nickel plated	£4.02
15830	22 mm, nickel plated	£6.54

Lever operated isolating valve for hot or cold services. Brass, nickel plated.

Part No.	Description	Unit Price	Qty
15831	15 mm, nickel plated, blue lever	£4.69
15847	15 mm, nickel plated, red lever	£4.69


Service Valves
Straight

Screwdriver operated service valve for hot or cold services. Brass, nickel plated.

Part No.	Description		Unit Price	Qty
15832	15 mm x 1/2" union, straight		£3.20


Angled

Screwdriver operated angled service valve for hot or cold services. Brass, nickel plated.

Part No.	Description		Unit Price	Qty
15833	15 mm x 1/2" union, angled		£3.31


ISOLATING VALVES
Used in hot or cold systems to isolate part of the system : avoids the need to drain down whole system. Compression fittings either end and brass or nickel plated finish. Temperature range 0 - 100°C, except P/Ns 18659/60 temperature range 0 - 90°C. P/Ns 18659/60/65 fitted with a WRAS approved check valve. P/Ns 18661/2 WRAS approved.


Straight, Single Check, Compression

Isolating Valve with Single Check Valve.

Part No.	Description	Unit Price	Qty
18659	15mm brass finish	£5.13
18660	15mm nickel plated	£5.70


Angled, Compression

90° Isolating Valve.

Part No.	Description	Unit Price	Qty
18661	15mm brass finish	£4.96
18662	15mm nickel plated	£5.56


Straight, Filter, Compression

Isolating Valve with Stainless Steel 60 Mesh (260 Micron) Filter.

Part No.	Description	Unit Price	Qty
18663	15mm brass finish	£8.03
18664	15mm nickel plated	£9.00


Straight, Filter, Single Check, Compression

Isolating Valve with Stainless Steel 60 Mesh (260 Micron) Filter, and Single Check Valve.

Part No.	Description		Unit Price	Qty
18665	15mm nickel plated		£10.85

If you haven't found the product you're looking for, then please try searching again, using more general keywords.

100

101

102

103

104

Help | Contact us | Our company | WEEE Directive | Terms and Conditions of Sale

Request a catalogue