Copper Cylinders & Insulation

INDIRECT / DIRECT COPPER CYLINDERS

Cylinders are manufactured to British Standards, and Kitemarked where stated. BS 1566 : Part 1 : 1984 Double Feed Indirect Copper Cylinders.
BS 3198 : 1981 Combination Tanks. BS 699 : 1984 Direct Copper Cylinders. Grade 3 - Test pressure 1.45 bar (21 p.s.i.) for 10 metre (33 ft) maximum working head. They comply with the proposed changes to Part L of the Building Regulations. The new cylinder specification, which the cylinders below meet, includes a Grade 3 cylinder with Grade 2 bottom, 35 mm thick foam insulation, the omission of the sacrificial anode, and a high recovery coil. Fitted with immersion heater boss.
For Immersion heaters to fit please click here

Indirect Copper Cylinders

Grade 3 BS Kitemarked
Indirect copper cylinders to BS 1566. Part 1 : 1984 made for use with wet central heating systems. All indirects have 2 x 1" BSP male primaries, 2 x 1" BSP female and 1 x 2.1/4" BSP immersion heater boss.
Suitable for fully pumped systems only.
Part No.DescriptionUnit PriceQty

Indirect Combination Tank

Grade 3 made to BS 3198
Combination unit offering traditional open - vented stored hot water in the indirect pattern. By storing the cold supply, tanks can be taken from the loft space. Installation is made simpler without the need to run pipes to and from a cold cistern. The indirect combination tank has 2 x 1" BSP male primaries, 1 x 1" BSP female, 1 x 1/2" BSP female and 1 x 2.1/4" BSP immersion heater boss.
Suitable for fully pumped systems only.
  Hot Volume Cold Volume
15211 115 litres 20 litres
15210 120 litres 40 litres
Part No.DescriptionUnit PriceQty

Direct Copper Cylinder

Grade 3 BS Kitemarked
Direct copper cylinders to BS 699 : 1984 for use in electric homes or where a solid fuel powered heating system is installed.
4 x 1" BSP female and 1 x 2.1/4" BSP immersion heater boss.
Part No.DescriptionUnit PriceQty

Stainless Steel Direct Cylinders

With welded joints tested to 3 bar, 22mm compression fittings, and 35mm insulation. Comply with Part L of Building Regs. Tapping heights as BS 1566.
Part No.DescriptionUnit PriceQty

Stainless Steel Indirect Cylinders

With welded joints tested to 3 bar, 22mm compression fittings, and 35mm insulation. Comply with Part L of Building Regs. Tapping heights as BS 1566.
Part No.DescriptionUnit PriceQty


UNVENTED STAINLESS STEEL HOT WATER CYLINDERS

FLOMASTER direct and indirect electric, gas/oil and solar range of stainless steel mains pressure unvented hot water cylinders are WRAS, WRc-NSF and BEAB approved with each cylinder being pressure tested to 15 bar. All cylinders are supplied complete with an installation kit.
Expansion vessels : 120 and 150 litre cylinders - 12 litre vessel 180, 210 and 250 litre cylinders - 19 litre vessel 300 litre cylinders - 24 litre vessel

PLEASE NOTE : UK DELIVERY WILL BE UP TO 10 DAYS.

FOR SOLAR UNVENTED STAINLESS STEEL HOT WATER CYLINDERS CLICK HERE

Direct (Electric)

Installation kit :
Inlet control set, temperature and pressure relief valve, 15/22 mm tundish, 2 x 3 kW immersion heaters, expansion vessel, and hose.
Part No.Height
mm		Diameter
mm		Weight
kg - empty		Capacity
litres		 Unit PriceQty

Indirect (Gas/Oil)

Installation kit :
Inlet control set, temperature and pressure relief valve, 15/22 mm tundish, expansion vessel, wall mounting kit and hose, 1 x 3 kW immersion heater (2 x 3 kW on 250 and 300 litre cylinders), 2 x port valves and a dual thermostat.
Part No.DescriptionUnit PriceQty


LOFT & CYLINDER INSULATION

Loft & Cylinder Insulation

THERMAFIBRE high quality general purpose insulating mat, composed of non-combustible glass wool. BSI approved product BS 5003 : Part 1 : 1985.

Ideal for thermal and acoustic applications in roofs, walls and ventilated timber floors in all types of building.

12659 Straight (Not perforated)
12660 Multiroll is perforated in widths of 2 x 570 mm
12662 Multiroll is perforated in widths of 3 x 380 mm
Part No.ThicknessLengthWidth Unit PriceQty

Hot Water Cylinder Jacket

EETO range of trade hot water cylinder jackets. 60 mm nominal thickness.

Glass fibre infill kitemarked to BS 5803 : Part 1 : 1985 and non-combustible to BS 476 : Part 4 : 1970.

50 micron PVC covering. Supplied as a four segment wrap round jacket, each segment 18".
Part No.DescriptionUnit PriceQty