Central Heating Controls

DANFOSS CENTRAL HEATING CONTROLS

Danfoss GP 102 Mini-Programmer

DANFOSS GP102 is a 24 hour electro-mechanical mini-programmer. For use with control systems where heating and domestic hot water are required at the same times. The heating can be switched off in the summer. It has a thumbwheel which allows early selection of future switching operations. Plus it clearly shows the current state of the output. 2 ONs and OFFs per day. Advance override.

Maximum ambient temperature : 55 °C.
Voltage : 220/240 V AC 50 Hz.
Contact rating : 6 (2) A.
Dimensions : 106 mm wide x 135 mm high x 63 mm deep.
Part No.Description Unit PriceQty

Danfoss GP 103 Timeswitch

DANFOSS GP103 is a 24 hour electro-mechanical timeswitch. It has a timed-off-constant switch, and a thumbwheel which allows early selection of future switching operations. Plus it will clearly show the current state of the output. 2 ONs and OFFs per day. Advance override.

Maximum ambient temperature : 55 °C.
Voltage : 220/240 V AC 50 Hz.
Contact rating : 6 (2) A.
Dimensions : 106 mm wide x
135 mm high x 63 mm deep.
Part No.Description Unit PriceQty

Danfoss 103 Timeswitch and Room Thermostat

The 103 electro-mechanical, 24 hour timeswitch has a timed, off, constant switch and a thumbwheel allowing early selection of future switching operations. 2 on/off per day, contact rating : 6 (2.5) A.

DIMENSIONS : 106 mm wide x 135 mm high x 63 mm deep.
Thermostat specification as P/N 19233 below.
Part No.Description Unit PriceQty

Danfoss Programmer and Room Thermostat

TS715Si programmer is a single channel electronic timeswitch, 24 hour, 5 - 2 day/7 day. Factory set clock, automatic summer/winter time change, backlit display, built-in programmes and holiday function. Voltage rating : 230 V AC 50 Hz.

DIMENSIONS :
135 mm wide x 88 mm high x 32 mm deep.
See below P/N 19233 for
RET230P thermostat specification.
Part No.Description Unit PriceQty

Danfoss MK 18 Time Controls

DANFOSS FP715 Si two channel full programmer has separate heating and hot water outputs operating on completely independent timebases for maximum flexibility. It fully meets the requirements of Part L Building Regulations. The programmer can be configured, at the time of installation, to provide 7 day, 24 hour or 5 day/2 day operation, and also to provide either 2 ON/OFFs or 3 ON/OFFs per day. The features include am/pm or 24 hour permanent back lit display, automatic BST/GMT time change, convenient overrides, holiday function, battery backup on power failure, factory set clock and “industry standard” wallplate. Battery supplied.

Voltage rating : 230 V AC +/- 10%, 50/60 Hz
Contact rating : 3 (1) A
Max. ambient temp. : 45 °C
Dimensions : 137 mm wide x 93 mm high x 29 mm deep.
Part No.Description Unit PriceQty

DANFOSS TS715 Si electronic timeswitch provides voltage free output contacts, making it an ideal solution for use with combi-boilers, which operate at low voltage. The single channel timeswitch can be configured, at the time of installation to provide 7 day, 24 hour or 5 day/2 day operation, and also to provide either 2 ON/OFFs or 3 ON/OFFs. The features include am/pm or 24 hour permanent back lit display, automatic BST/GMT time change, convenient user overrides, holiday function, battery backup on power failure, factory set clock and “industry standard” wallplate. Battery supplied.

Voltage rating : 230 V AC +/- 10% 50/60 Hz
Contact rating : 3 (1) A
Max. ambient temp. : 45 °C
Dimensions : 137 mm wide x 93 mm high x 29 mm deep
Part No.Description Unit PriceQty

Danfoss Motorised 2 Port Rotary Shoe Valve

HP22 motorised 2 port rotary shoe valve paddle valve for flow control. Spring return to closed. A lever enables the valve to be opened manually. 22 mm compression connections.
Part No.Description Unit PriceQty

Danfoss HS3 Motorised Valve

DANFOSS 'H' series shoe motorised three port valve for flow control applications in domestic central heating systems. Mid-position three port. Includes HSA3 actuator. Spring return to heating closed. The spring return actuator has an auxiliary switch, and one metre of cable with industry standard wire colours. A lever enables the valve to be opened manually. All three connections are 22 mm compression fittings.
Part No.Description Unit PriceQty

Danfoss FMT230D

DANFOSS FMT230D flush mounted room thermostat with LCD output indicator and setting dial. Designed to fit a one gang electrical flush fitting box with minimum depth of 25 mm.

SPECIFICATIONS
Voltage rating : :
230 V +/- 15%, 50/60 Hz
Contact rating :
3 (1) A
Max. ambient temp. :
 45°C
Dimensions : 85 mm wide x 85 mm high x 35 mm deep (16 mm exposed)
Part No.Description Unit PriceQty

Danfoss RET230P

RET230P electronic room thermostat offers micro-processor accuracy and easy temperature adjustment. Suitable for heating or cooling applications. Voltage ratings : 230 V AC. Contact rating : 3 (1) A. Temperature : 5 - 30°C.

DIMENSIONS : 85 mm wide x 86 mm high x 42 mm deep.
Part No.Description Unit PriceQty

Danfoss TP5000 Programmable Room Thermostat

The DANFOSS TP5000 Si is a battery powered easy to use and install 5/2 electronic programmable room thermostat offering up to six time and temperature changes per day. Large LCD display, automatic BST/GMT time change, service interval function, hard wired with built in sensor. 2 AA batteries supplied.

Dimensions :
110 mm wide x 88 mm high x 28 mm deep.
Part No.Description Unit PriceQty

Danfoss TP9000 Programmable Room Thermostat

TP9000 programmable room thermostat includes an extra timing circuit for controlling up to 3 domestic hot water on/off times per day. Providing full 7 day/5 day/2 day or 24 hour control, holiday and frost protection functions. Complete with wired remote room temp. sensor. Up to 6 time and temperature changes per day. Temperature control range : 5 - 30°C. Manual overrides : 1, 2 or 3 hours. Power supply 230 V AC, 50 Hz, contact rating : 3 (1) A, switching 2 x SPDT (linked internally).

DIMENSIONS :
137 mm wide x 93 mm high x 29 mm deep.
T52 remote sensor :
45 mm wide x 61 mm high x 22 mm deep.
Part No.Description Unit PriceQty

Danfoss Cylinder Thermostat

DANFOSS ATC is an electro-mechanical surface mounted cylinder thermostat which is clamped to the cylinder by means of a spring clamping band (supplied).

SPECIFICATIONS :
Switching differential :
6 K to 10 K
Switch type :
SPDT
Switch rating :
6 (2) A
Temperature range : 30 °C to 90 °C
Part No.Description Unit PriceQty

Danfoss Heating Control Packs

These three central heating control packs have been designed for the contract market. They offer the installer/contractor integrated components for easy installation. They include motorised valve(s), room thermostat, cylinder thermostat, wiring box and programmer.

Heatshare 2-port Pack, 22mm

Contents:
FP715 electronic programmer,
HP22 two-port 22 mm
motorised valve, two off,
RET23OP room thermostat,
ATC cylinder thermostat,
WC4B 16 way wiring box

Part No.Description Unit PriceQty

Heatshare 3-port Pack, 22mm

Contents:
FP715 electronic programmer,
HS3 three-port mid-position
22 mm motorised valve, one off,
RET23OP room thermostat,
ATC cylinder thermostat,
WC4B 16 way wiring box

Part No.Description Unit PriceQty

Heatshare SET3M, 3-port pack, 22 mm

Contents:
SET 3M electro-mechanical programmer,
HS3 three-port mid-position 22 mm
motorised valve, one off,
RMT room thermostat,
ATC cylinder thermostat,
WC4B 16 way wiring box

Part No.Description Unit PriceQty

Danfoss Unvented Cylinder Control Pack

The unvented cylinder control pack has been designed for the contract market. It offers the installer/contractor integrated components for easy installation. It includes programmer, room thermostat, motorised valve and wiring box.
Part No.Description Unit PriceQty