Part Number: 6266
Angled Industrial Meter Regulator - 2”
Angled pattern regulator designed for use with U and G series gas meters.
Approved to BS EN 88/+A1 and meets the essential requirements of the European Gas Appliance Directive (GAD 2009/142/EC).
The regulator is supplied fitted with a spring to give an outlet pressure of 12 to 25 mbar, set at 21 mbar. A different outlet pressure range may be obtained by fitting an alternative spring.
Supplied with a brass outlet adaptor incorporating the BS 746 meter connection thread. If the BS 746 adaptor is to be used, a washer P/N 8734 (not supplied) is required.
Industrial/Angled Springs
Springs are listed in the Product Options below. NOT fitted to a regulator.| P/N | Outlet pressure ranges |
|---|---|
| 13183 | 5-15 mbar |
| 7775 | 22-35 mbar |
| 7449 | 30-75 mbar |
| 10394 | 70-80 mbar |
Product Specification
| Standards | BS EN 88/+A1 |
| Connection | 2" BS 746 F |
| Inlet Pressure | Max: 200 mbar |
| Operating Temperature | -20 to 70°C |
| Pattern | Angled |
| Size | 2" |
| Suitable Application | For use with U25, U40, and G25 gas meters. |
| Type | Regulator |
Ask a Question
Got a Question?
(Our Experts Will Answer It)
Ask a Question
Submit Question
Thank you for your question!
We will send you an email when your question is answered by the Experts.
- Looking for more information?
- Ask a question and our experts will answer it.
