Part Number: 7492
Drain Cock Type A - 1/2" BSP Brass
1/2" lockshield drain cock with BSP male end, type A to BS 2879.
Brass and DZR drain cocks. DZR drain cocks are preferred (and/or specified) in areas where the water removes zinc from conventional brass. The lockshield prevents easy operation of the drain cock without a key.
Key part number 24314.
BES Ltd., British Standard Pipe Thread Identification Chart.
BSP – This is an abbreviation used for British Standard Pipe threads, and the size refers to the nominal bore (or internal diameter) of the steel pipe the thread was originally designed for, not the diameter of the actual thread. Please measure your maximum (or major) thread diameter in millimetres and use the chart below to identify the BSP size you need.
Further advice can be obtained from our Technical Team if you are still unsure.
BSP Size | Actual Diameter of Thread |
---|---|
1/8" | 9.728 mm |
1/4" | 13.157 mm |
3/8" | 16.662 mm |
1/2" | 20.995 mm |
3/4" | 26.441 mm |
1" | 33.249 mm |
1 1/4" | 41.910 mm |
1 1/2" | 47.803 mm |
2" | 59.614 mm |
2 1/2" | 75.184 mm |
3" | 87.884 mm |
The information above is provided for guidance only. The data shown represents extracts interpreted by us of the British Standards. If more clarification and accuracy is required, you should refer to the relevant British Standard.
Product Specification
Standards | BS 2879 |
Connection | BSP PM |
Dimensions | 1/2" BSP |
Finish | Brass |
Material | Brass |
Size | 1/2" |
Type | Drain Cock, Type A |
Ask a Question
- Looking for more information?
- Ask a question and our experts will answer it.
Hello there
You have added
You might also like
Product Options
Related Products
Part Number :
7492Part Number :
6923Part Number :
6922Part Number :
21856Part Number :
21822Part Number :
12611Part Number :
18180Part Number :
10934Part Number :
13756Part Number :
9088Part Number :
16444Part Number :
8148