Part Number: 8668
Iron Equal Union Connector Straight - 3/4" F Galvanised
Figure: 340
BES Ltd., British Standard Pipe Thread Identification Chart.
BSP – This is an abbreviation used for British Standard Pipe threads, and the size refers to the nominal bore (or internal diameter) of the steel pipe the thread was originally designed for, not the diameter of the actual thread. Please measure your maximum (or major) thread diameter in millimetres and use the chart below to identify the BSP size you need.
Further advice can be obtained from our Technical Team if you are still unsure.
BSP Size | Actual Diameter of Thread |
---|---|
1/8" | 9.728 mm |
1/4" | 13.157 mm |
3/8" | 16.662 mm |
1/2" | 20.995 mm |
3/4" | 26.441 mm |
1" | 33.249 mm |
1 1/4" | 41.910 mm |
1 1/2" | 47.803 mm |
2" | 59.614 mm |
2 1/2" | 75.184 mm |
3" | 87.884 mm |
The information above is provided for guidance only. The data shown represents extracts interpreted by us of the British Standards. If more clarification and accuracy is required, you should refer to the relevant British Standard.
Product Specification
Standards | BS EN 10242 (which partially supersedes BS 143 and BS 1256) |
Connection | BSP F |
Finish | Galvanised |
Fitting Type | Union |
Material | Malleable Iron |
Size | 3/4" |
Type | Iron to Iron Equal Union |
Ask a Question
- Looking for more information?
- Ask a question and our experts will answer it.
Hello there
You have added
You might also like
Product Options
Related Products
Part Number :
6526Part Number :
9595Part Number :
9610Part Number :
9279Part Number :
16767Part Number :
9801Part Number :
6878Part Number :
6962Part Number :
21385Part Number :
21633Part Number :
7460Part Number :
9321