Part Number: 8958
Gas Control Valve Tap with Flame Supervision & Piezo
350 mm long Piezo lead.
CE certified to the relevant requirements of EN 125, EN 126 and EN 1106 (Certificate No. E6055).
This valve has flame failure protection, rotary piezo igniter (which gives single-handed operation for ignition), and will give a variable gas flow between low and full rates.
Flow rate for Natural Gas at 20 mbar. : FULL ON 1.5 m³/h.; LOW (adjustable) 0.02 to 0.55 m³/h.
Operating sequence : Off, Pilot + ignition, Pilot + minimum flow, Pilot + maximum flow.
Connections : inlet and outlet are for 8 mm o.d tube; pilot is for 4 mm o.d. tube; thermocouple is M8.
Fascia nut is M15 (P/N 9686).
Supplied with control knob (P/N 8001), nuts and olives.
CE certified to the relevant requirements of EN 125, EN 126 and EN 1106 (Certificate No. E6055).
This valve has flame failure protection, rotary piezo igniter (which gives single-handed operation for ignition), and will give a variable gas flow between low and full rates.
Flow rate for Natural Gas at 20 mbar. : FULL ON 1.5 m³/h.; LOW (adjustable) 0.02 to 0.55 m³/h.
Operating sequence : Off, Pilot + ignition, Pilot + minimum flow, Pilot + maximum flow.
Connections : inlet and outlet are for 8 mm o.d tube; pilot is for 4 mm o.d. tube; thermocouple is M8.
Fascia nut is M15 (P/N 9686).
Supplied with control knob (P/N 8001), nuts and olives.
Product Specification
| Standards | EN 125, EN 126 and EN 1106 |
| Connection | 8 mm inlet & outlet, 4 mm pilot |
| Max. Operating Temperature | 0 to 80°C |
| Size | 350 mm |
| Suitable Application | Decorative fuel effect fires, but are also suitable for a wide range of domestic and commercial heating and cooking appliances. For Natural Gas and LPG. |
| Type | Gas Tap |
Ask a Question
Got a Question?
(Our Experts Will Answer It)
Ask a Question
Submit Question
Thank you for your question!
We will send you an email when your question is answered by the Experts.
- Looking for more information?
- Ask a question and our experts will answer it.
