Part Number: 8192
Industrial Regulator - 1.1/2" F x F
Service and appliance regulator suitable for a wide range of domestic, commercial and industrial applications. May be installed in horizontal or vertical pipework.
Sizes up to and including 2" are approved to BS EN 88-1:2007 (Class A Group 2) and meet the essential requirements of the European Gas Appliance Directive (GAD 2009/142/EC).
Operating temperature range: -20 to 70°C.
Maximum inlet pressure: 75 mbar.
The regulators are supplied fitted with a spring to give an outlet pressure of 17.5-25 mbar (7"-10" wg), set at 21 mbar. A different outlet pressure range may be obtained by fitting an alternative spring.
Thread: 1.1/2" BSP female to BS EN 10226-1:2004.
For Natural Gas and LPG.
Industrial/Angled Springs
Springs are listed in the Product Options below. NOT fitted to a regulator.P/N | Outlet pressure ranges |
---|---|
10400 | 5-15 mbar |
15537 | 22-35 mbar |
10192 | 35-70 mbar |
13638 | 70-80 mbar |
BES Ltd., British Standard Pipe Thread Identification Chart.
BSP – This is an abbreviation used for British Standard Pipe threads, and the size refers to the nominal bore (or internal diameter) of the steel pipe the thread was originally designed for, not the diameter of the actual thread. Please measure your maximum (or major) thread diameter in millimetres and use the chart below to identify the BSP size you need.
Further advice can be obtained from our Technical Team if you are still unsure.
BSP Size | Actual Diameter of Thread |
---|---|
1/8" | 9.728 mm |
1/4" | 13.157 mm |
3/8" | 16.662 mm |
1/2" | 20.995 mm |
3/4" | 26.441 mm |
1" | 33.249 mm |
1 1/4" | 41.910 mm |
1 1/2" | 47.803 mm |
2" | 59.614 mm |
2 1/2" | 75.184 mm |
3" | 87.884 mm |
The information above is provided for guidance only. The data shown represents extracts interpreted by us of the British Standards. If more clarification and accuracy is required, you should refer to the relevant British Standard.
Product Specification
Standards | BS EN 88-1:2007. GAD 2009/142/EC |
Connection | 1.1/2" BSP F |
Inlet Pressure | Max: 75 mbar |
Operating Temperature | -20°C to 70°C |
Outlet Pressure | 17.5 to 25 mbar |
Pattern | Straight |
Size | 1.1/2" |
Suitable Application | Service and appliance regulator for a wide range of domestic, commercial & industrial applications |
Type | Regulator |
Product Attachments
Ask a Question
- Looking for more information?
- Ask a question and our experts will answer it.
Hello there
You have added
You might also like
Product Options
Related Products
Part Number :
10400Part Number :
15537Part Number :
10192Part Number :
13638Part Number :
8778Part Number :
6322Part Number :
15200Part Number :
14860Part Number :
0857Part Number :
8726Part Number :
9707Part Number :
11708