Service and appliance regulator suitable for a wide range of domestic, commercial and industrial applications. May be installed in horizontal or vertical pipework.
Sizes up to and including 2" are approved to BS EN 88/+A1 (Class A Group 2) and meet the essential requirements of the European Gas Appliance Directive (GAD 2009/142/EC).
Sizes 2.1/2" and over, which are not within the scope of BS EN 88/+A1, meet the general requirements of the European Gas Appliance Directive (90/396/EEC).
Operating temperature range: -20 to 70°C.
Maximum inlet pressure: 200 mbar (2.9 p.s.i).
The regulators are supplied fitted with a spring to give an outlet pressure of 17.5-25 mbar (7"-10" wg), set at 21 mbar. A different outlet pressure range may be obtained by fitting an alternative spring.
Thread: 2" BSP female to BS EN 10226-1.
For Natural Gas and LPG.
Industrial/Angled Springs
Springs are listed in the Product Options below. NOT fitted to a regulator.
P/N
Outlet pressure ranges
13183
5-15 mbar
7775
22-35 mbar
7449
30-75 mbar
10394
70-80 mbar
BSP Explained
×
BES Ltd., British Standard Pipe Thread Identification Chart.
BSP – This is an abbreviation used for British Standard Pipe threads, and the size refers to the nominal bore (or internal diameter) of the steel pipe the thread was originally designed for, not the diameter of the actual thread. Please measure your maximum (or major) thread diameter in millimetres and use the chart below to identify the BSP size you need.
Further advice can be obtained from our Technical Team if you are still unsure.
BSP Size
Actual Diameter of Thread
1/8"
9.728 mm
1/4"
13.157 mm
3/8"
16.662 mm
1/2"
20.995 mm
3/4"
26.441 mm
1"
33.249 mm
1 1/4"
41.910 mm
1 1/2"
47.803 mm
2"
59.614 mm
2 1/2"
75.184 mm
3"
87.884 mm
The information above is provided for guidance only. The data shown represents extracts interpreted by us of the British Standards. If more clarification and accuracy is required, you should refer to the relevant British Standard.
https://www.bes.co.uk/industrial-regulator-2-f-x-f-8193/44149Industrial Regulator - 2" F x Fhttps://www.bes.co.uk/media/catalog/product/2/i/2in-x-2in-f-x-f-industrial-regulator_min_8193_P_1.jpg274.3274.3GBPInStock/Natural Gas & LPG/Natural Gas/Regulator/Commercial & Industrial715125403705<p>Service and appliance regulator suitable for a wide range of domestic, commercial and industrial applications. May be installed in horizontal or vertical pipework.</p><p> Sizes up to and including 2" are approved to BS EN 88/+A1 (Class A Group 2) and meet the essential requirements of the European Gas Appliance Directive (GAD 2009/142/EC).</p><p>Sizes 2.1/2" and over, which are not within the scope of BS EN 88/+A1, meet the general requirements of the European Gas Appliance Directive (90/396/EEC).</p><p>Operating temperature range: -20 to 70°C.</p><p>Maximum inlet pressure: 200 mbar (2.9 p.s.i).</p><p>The regulators are supplied fitted with a spring to give an outlet pressure of 17.5-25 mbar (7"-10" wg), set at 21 mbar. A different outlet pressure range may be obtained by fitting an alternative spring.</p><p>Thread: 2" BSP female to BS EN 10226-1.</p><p>For Natural Gas and LPG.</p><h3>Industrial/Angled Springs</h3>
Springs are listed in the Product Options below. NOT fitted to a regulator.
<table>
<thead>
<tr>
<th>P/N</th>
<th>Outlet pressure ranges</th>
</tr>
</thead>
<tbody>
<tr>
<td>13183</td>
<td>5-15 mbar</td>
</tr>
<tr>
<td>7775</td>
<td>22-35 mbar</td>
</tr>
<tr>
<td>7449</td>
<td>30-75 mbar</td>
</tr>
<tr>
<td>10394</td>
<td>70-80 mbar</td>
</tr>
</tbody>
</table>
{{block class="Magento\\Cms\\Block\\Block" block_id="369"}}Unbranded00https://www.bes.co.uk/media/catalog/product/2/i/2in-x-2in-f-x-f-industrial-regulator_min_8193_L_1.jpghttps://www.bes.co.uk/media/catalog/product/2/i/2in-x-2in-f-x-f-industrial-regulator_min_8193_P_2.jpgadd-to-cartfacet_type:Regulatorspecial_price:274.300000availability:Transactionalis_on_sales:Nomore_sizes:6299,6294,8192,8194,8195,6285,6290,13183,7775,7449,10394sku:8193TransactionalRegulatorNo6299,6294,8192,8194,8195,6285,6290,13183,7775,7449,103948193274.300000No{"Standards":"BS EN 88-1. GAD 2009\/142\/EC","Connection":"2" BSP F","Inlet Pressure":"Max: 200 mbar","Operating Temperature":"-20°C to 70°C","Outlet Pressure":"17.5 to 25 mbar","Pattern":"Straight","Size":"2"","Suitable Application":"Service and appliance regulator for a wide range of domestic, commercial & industrial applications","Type":"Regulator"}Unbranded2"
