Part Number: 23665
Manufacturer's Part Number: KANE452NO OIL KIT
Kane 452 Flue Gas Analyser Oil Kit
KANE 452 Oil kit contains a Kane 452NO flue gas analyser, IRP2 infra-red printer, manual smoke pump, 0 to 300 psi pressure gauge, manifold, compound gauge (pressure and vacuum), high pressure hose, 2 adaptors and rucksack.
KANE 452NO flue gas analyser with rotary switch, four function buttons, 6 line display with screen protection and backlight, long-life sensors, built-in torch light, 30 seconds start-up, dual pump for CO sensor ‘over-range’ protection, low range NO sensor, structured commissioning test sequence, faster print (with optional printer) and 2 decimal point resolution on CO₂ for readings between 0 and 1%. Measures temperature, CO, NO and CO₂. Calculates O₂, CO/CO₂ ratio, excess air and efficiency for wood pellets, gaseous fuels and light oils (28/35 sec).
Independently approved to BS EN 50379:2004.
PLEASE NOTE: THIS ITEM WILL BE DELIVERED DIRECT FROM OUR SUPPLIER OWING TO INSTRUMENT CALIBRATION. UK DELIVERY WILL BE UP TO 10 DAYS - BUT USUALLY WITHIN 5 DAYS. ORDER CANCELLATION MAY INCUR CHARGES.
This is discontinued
|CO Range||0 To 2000 Ppm|
|Detection Range||CO: 0 To 2000 Ppm|
|Differential Pressure||Normal Range: ±80 Mbar (Maximum Over Range Without Damage To Sensor Is ±400 Mbar)|
|Dimensions||Handset: 200 X 90 X 45mm, Probe: 300 X 6mm Dia. With 240mm Long Stainless Steel Shaft And Type K Thermocouple.|
|Flue Temperature||0 To 600° C, Resolution: 0.1° C, Accuracy: +2° C Or +0.3% Reading|
|Gas Measurements||Oxygen Range: 0 To 21%, Oxygen Resolution: 0.1° C, Oxygen Accuracy: +0.3%, Carbon Monoxide Range: 0 To 2000 Ppm, Carbon Monoxide Resolution: 1 Ppm, Carbon Monoxide Accuracy: +3 Ppm Or ±5% Reading, Nitric Oxide Range: 0 To 100 Ppm, Nitric Oxide Resolution: 1 Ppm, Nitric Oxide Accuracy: +2 Ppm At 100 Ppm.|
|Hose Length||3 M|
|Inlet Temperature Internal Sensor||0 To 50° C, Resolution: 0.1° C, Accuracy: +1.0° C Or +0.3% Reading|
|Kit Contents||Kane 452NO Infra-red Flue Gas Analyser With A Protective Rubber Sleeve Containing A Magnet For ‘hands Free’ Use, IRP2 Infra-red Printer, Manual Smoke Pump, 0 To 300 Psi Pressure Gauge, Pressure Gauge Manifold, Compound Gauge (pressure And Vacuum), High Pressure Hose, 2 Adaptors, Rucksack.|
|Sensor Life||CO Sensor (5 Years), Long Life Infra-red Based CO₂ Sensor (5 Years), Low Range NO Sensor (2 Years).|
|Suitable Application||Multi-fuel: Light Oils (28/35 Seconds), Gaseous Fuels And Wood Pellets.|
|Type||Flue Gas Analyser|
Ask a Question
You have successfully added:
You might also like