Part Number: 6266
Angled Industrial Meter Regulator - 2”
Angled pattern regulator designed for use with U and G series gas meters.
Approved to BS EN 88-1:2007 and meets the essential requirements of the European Gas Appliance Directive (GAD 2009/142/EC).
The regulator is supplied fitted with a spring to give an outlet pressure of 12 to 25 mbar, set at 21 mbar. A different outlet pressure range may be obtained by fitting an alternative spring.
Supplied with a brass outlet adaptor incorporating the BS 746 meter connection thread. If the BS 746 adaptor is to be used, a washer P/N 8734 (not supplied) is required.
Industrial/Angled SpringsSprings are listed in the Product Options below. NOT fitted to a regulator.
|P/N||Outlet pressure ranges|
|Standards||BS EN 88-1:2007. GAD 2009/142/EC|
|Connection||2" BS 746 F|
|Inlet Pressure||Max: 200 mbar|
|Operating Temperature||-20 to 70° C|
|Suitable Application||For use with U25, U40, and G25 gas meters.|
Ask a Question
You have successfully added:
You might also like