| ||Angled pattern regulators designed for use with U and G series gas meters. Sizes up to and including 2" are approved to BS EN 88 (Class A. Group 2) and all sizes meet the essential requirements of the European Gas Appliance Directive (90/396/EEC).|
Maximum inlet pressure: 350 mbar.
Operating temperature range: -20 to 70°C.
P/N 6267 has a universal flange design making the unit suitable for fitting
with a 65 mm flange (BS 10 Table D) and also with an 80 mm flange (BS
4504 and BS 10 Table D).
P/N 6264/5/6 are supplied complete with a brass outlet adaptor incorporating
the BS 746 meter connection thread. If the BS 746 adaptor is to be used,
a washer (not supplied) is needed; these can be found on page 37 by clicking
the following link Washers to BS 746
(P/N 8783, 8725, and 8734 respectively).
The performance of P/N 6267 allows the regulator to be fitted to a 4"
meter (U160 and G100), this is achieved by ordering P/N 6300 (80 mm flange
(BS 10 Table D) to 100 mm flange (P/N 16 ANSI) adapter) in conjunction
with the regulator.
Applications are generally as follows:
P/N 6264 1.1/4"
P/N 6265 1.1/2"
P/N 6266 2" U25, U40,
P/N 6267 3" U65, U100,
U160*, G40, G65, G100*.
*Only possible using adaptor P/N 6300.
For Natural Gas and LPG.