Whichever job you're fixing for, the screw needs to match the material, the finish and how it's driven, not just the size. We stock self-tapping screws for metal and sheet materials, Pozidriv woodscrews in single and twin-thread patterns, solid brass slotted screws for visible fixtures, and concrete frame screws that go straight into masonry without a separate wall plug. Alongside the screws themselves, we carry the accessories that go with them - plug cutters and countersinking tools for a neat finish, and pre-packed Handibox assortments for anyone who'd rather buy a mixed box of common sizes than order each one separately.
Shop for the parts you need and see if your order qualifies for free delivery. And don't forget that with over 15,000 products in stock right now, you can rest assured that any screws you need can make their way to you in no time at all.
Read More
Each type below suits a different combination of material, finish and drive, so the right one depends on what you're fixing and how it needs to look once it's done.
Self-tapping screws cut their own thread into the material as they're driven, so no pre-tapped hole is needed; the case-hardened, zinc-plated construction and gimlet point are built for that job. We stock both pan head and countersunk head versions across most common gauges and lengths, in boxes of 250 to 1000, including the Pan head Self-Tapping Screw - 1/2" x 8 - 1000 Pcs and Self-tapping Countersunk Screw - 1" x 8 - 1000 Pcs.
Our single thread Pozidriv woodscrews are stocked in metric sizes, with a 25° point that generally avoids the need for a pilot hole and a zinc-plated, yellow chromate passivated finish that's hardened and lubricated. They're built for chipboard, MDF and soft or hardwood, with good resistance to pull-out in chipboard specifically - the Pozidriv® Countersunk Screw - 5mm x 50mm - 200 Pcs and Pozidriv® Countersunk Screw - 6mm x 80mm - 100 Pcs cover the smaller and larger ends of the range.
Twin-thread Pozidriv woodscrews use two helical threads rather than one, driving them in faster and gripping more securely with fewer turns of the driver. In our range, these are stocked in imperial gauge and length sizes rather than the metric sizing used for the single-thread range, and are zinc-plated and hardened throughout.
These are our solid brass, slotted-drive woodscrews, built with a plain shank and gimlet point for decorative work such as brass hinges, bathroom fittings, shelf brackets and handles rather than structural fixing. The countersunk head sits flush with the surface, while the roundhead sits proud and visible, which is the one to reach for where the screw itself is part of the finished look. Options include the Slotted Countersunk Head Screws 1" x 6 - 200 Pcs and Slotted Roundhead Screw - 1" x 8 - 200 Pcs.
Concrete frame screws fix door and window frames straight into masonry or concrete without a separate wall plug, using an interlocking thread that anchors directly into a 6mm drilled hole - useful where you'd rather not mark out and reposition a plug first. Each box includes cover caps and a T30 Torx bit to match the Torx countersunk head, and the range runs from 42mm up to 202mm in length, including the Concrete Frame Screw - 7.5mm x 62mm - 100 Pcs and the longer Concrete Frame Screw - 7.5mm x 152mm - 100 Pcs.
A plug cutter bores a cylindrical wooden plug sized to a specific screw gauge, used to conceal a countersunk screw head once it's driven - the Disston No. 8 Screw Plug Cutter is sized for a No.8 screw, with No.6, No.10 and No.12 versions also available. A screwdigger does a different job entirely: it drills the pilot hole, countersink and counterbore in one pass, sized to both the screw gauge and a matching drill bit - the Disston No. 8 Screw Screwdigger - Uses 7/64" Drill Bit is the No.8 equivalent. For marking a screw's starting point by hand before drilling, the Stanley Bradawl is worth keeping in the toolbox.
Rather than ordering each size separately, a Handibox packs a full assortment of common screw sizes into a single compartmentalised metal case. The Chipboard Medium Handibox holds nearly 2,900 chipboard screws from 3mm to 6mm diameter, plus 450 red and brown wall plugs. The same assortment format is also stocked in twin-thread woodscrews. If you just need one size of screw and plug together, rather than a full assortment, the Screw & Red Wall Plug - 1.1/2" x 8 Pack of 500 pairs contains 500 twin-thread screws with 500 matching wall plugs in one box.
Both are Pozidriv countersunk woodscrews with a zinc-plated, hardened finish, so the choice usually comes down to the job and the sizing you're working to. Twin thread's two helical threads mean it drives in with fewer turns, which is useful when you're getting through a lot of fixings quickly. Single thread is specifically built and finished for good pull-out resistance in chipboard, MDF and softwood or hardwood, and is the one stocked in metric sizes if that's what the rest of your fixings are specified in.
Start with the material you're fixing into. Wood calls for a Pozidriv woodscrew, metal or plastic sheet calls for a self-tapping screw that cuts its own thread, and masonry or concrete calls for a frame screw rather than a standard woodscrew and plug. Then think about finish. Zinc-plated steel suits everyday structural fixing, while the solid brass slotted range is for fixtures where the screw will be seen. Finally, consider pack size. Single-size trade boxes suit a job with one screw throughout, while a Handibox assortment is worth having on the van for smaller jobs that call for a mix of sizes.
We've supplied trade and DIY customers with hardware for many decades, and keep this range stocked in the gauges and lengths that come up again and again on site. If you need a wall plug to go with a standard woodscrew rather than a frame fixing, our fixings range covers wall plugs and cavity fixings, and our wider screws & fixings range covers nails and other fasteners for the rest of the job.
When working with screws, you'll want to be using tools that make the job quick and effortless. That's where our range of power tools comes in. We have great deals on drills, drivers, and accessories from trusted brands like Bosch, Hitachi & Makita. If there's a specific brand you're partial to, our brands' section may have it in stock as well.
Found the screws you need? You'll see each product page has a clock letting you know how much time is left today for next working day Mainland UK delivery. If you're ordering from somewhere else, we recommend looking at relevant information from our delivery information section here.
If you have any questions about the screws currently available or need help sourcing a specific product, give BES a call today on 0800801090.
What's the difference between single and twin thread woodscrews?
Twin-thread screws have two helical threads rather than one, which drives them in faster with fewer turns. Single-thread screws are built and finished specifically for good pull-out resistance in chipboard, MDF and timber, and are stocked in metric sizes rather than the imperial gauge sizes used for the twin-thread range.
What's the difference between a self-tapping screw and a woodscrew?
A self-tapping screw cuts its own thread into the material it's driven into, typically metal or plastic sheet, without needing a pre-tapped hole. Wood screws use a thread pattern suited to timber rather than sheet material, and are the better choice for wood-fixing jobs.
Do these screws need a pilot hole?
It depends on the type. Our single and twin thread Pozidriv woodscrews are built to generally avoid needing one, and the concrete frame screws anchor directly into a drilled hole without a wall plug. Always check the individual product listing if you're working with a dense or unusual material.
Why would I choose a roundhead screw over a countersunk one?
A countersunk screw sits flush with the surface, while a roundhead sits proud and stays visible once fitted. Both are stocked in solid brass with a slotted drive, so the roundhead is the one to choose where the screw is part of the finished look, such as on brass hinges or handles.
Can self-tapping screws be used in wood?
They're built for metal and plastic sheet materials, where the thread needs to cut into a harder surface as it's driven. For wood, our single or twin thread Pozidriv woodscrews are the better match.