Part Number: 21280

Manufacturer's Part Number: PB1715

Polyplumb Bent Tap Connector - 1/2" BSP Swivel x 15mm

1/2" BSP swivel x 15 mm Polyplumb bent tap connector. Supplied with EPDM washer. Hand tighten brass nut, plus 1/4 turn with spanner. NOT for central heating.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Product Specification

Approved By WRAS
Brand Polypipe
Connection BSP Swivel X Push-fit
Demountable/Reusable Reusable With Component Kit - P/N 21317
Fitting Type Tap Connector
Kitemark 38148
Manufactured/Approved To BS EN ISO 9002:2008
Material Plastic
Size 1/2" X 15 Mm
Sub Brand Polyplumb
Type Tap Connector

Ask a Question

Questions and Answers - FAQ

Polyplumb Bent Tap Connector - 1/2" BSP Swivel x 15mm

£6.02 £5.02
£6.02 £5.02
More product options available