Polyfit Spigot Draincock - 15mm Brass

£12.26 £10.22
£12.26 £10.22
More product options available

Part Number: 18166

Manufacturer's Part Number: FIT3615

Polyfit Spigot Draincock - 15mm Brass

15 mm spigot draincock, brass. Polyfit is a fully demountable and reusable push-fit system for hot and cold plumbing and radiator central heating systems. The radial sealing force provides a more secure watertight seal and the 3-pin protection feature ensures fittings are not accidentally demounted when installing through joists, floors or walls. Pipe stiffeners must be used when using plastic pipe ; these are not required for copper pipe. for first fix installations, pipe and fittings should be tested. The system should be completely filled using water at a maximum of 20°C, and tested at a pressure of 18 bar for at least 15 minutes. for secondary fixings the complete installation, including appliances, should be tested with water to the maximum test pressure allowed by the appliance manufacturers. Polyfit must not be used for gas, oil, compressed air, solar heating, primary or gravity pipework from a solid fuel back boiler.

Product Specification

Approved By WRAS
Brand Polypipe
Fitting Type Drain Cock
Kitemark 38148
Manufactured/Approved To BS EN ISO 9002:2008
Material Brass
Size 15 Mm
Sub Brand Polyfit
Type Drain Cock

Ask a Question

Questions and Answers - FAQ