Part Number: 25253
Aube TH232 Programmable Underfloor Heating Thermostat
Aube TH232 has been designed to provide total control and flexibility when using your electric underfloor heating system. The fully programmable controls allow flexibility, using sensors for floor only, air only or a combination of both. The TH323 is capable of switching a maximum of 15 amps, giving the ability to switch multiple mats whilst using one thermostat control. For an area that requires a single thermostat to control a load greater the 15 amps, a suitably sized contactor should be installed which can then be controlled by the thermostat.
Features LCD display, auto BST/GMT time update, 4 time periods per day, displays actual room temperature, proportional integral adaptive (PIA) controller, auto/manual modes and override/Off functions.
Supplied with a 3 m floor sensor cable.
NOTE: a 35 mm deep back box is required for installation.
Features LCD display, auto BST/GMT time update, 4 time periods per day, displays actual room temperature, proportional integral adaptive (PIA) controller, auto/manual modes and override/Off functions.
Supplied with a 3 m floor sensor cable.
NOTE: a 35 mm deep back box is required for installation.
See More >
Specification
Contact Rating | 15 A |
Dimensions | With backplate : H 93 x W 88 x D 27 mm. |
Display | LCD |
ErP Rating | Class 4 |
IP Rating | IP20 |
Operating Temperature | 5 to 30°C |
Power Supply | 230 V, 50 Hz |
Type | Programmable Thermostat |
7 or 5/2 Day | 7 day, 5/2day |
Questions
Delivery
Write Your Own Review