Part Number: 15186
Drain Test Plug 1.1/2" (40mm) 10mm Test Point
Top quality pure nylon plugs with rubber rings, for sealing pipes. Insert in the pipe
and turn the wing nut to expand the rubber ring and obtain a seal.
Applications include :
1. Prevention of contamination in a pipe by water, gas, litter, rodents, etc.
2. Inert gas purging. SEE PAGES 40 AND 41 for OTHER PURGING EQUIPMENT.
3. Drain testing.
4. Preparation of ducting and conduit for on-site thermoforming.
* PLEASE NOTE : All pressures are quoted by the manufacturer and are guidelines
with the results dependent upon exact i.d. of the tube/pipe, number of turns,
conditions of the inside of the pipe and the material.
and turn the wing nut to expand the rubber ring and obtain a seal.
Applications include :
1. Prevention of contamination in a pipe by water, gas, litter, rodents, etc.
2. Inert gas purging. SEE PAGES 40 AND 41 for OTHER PURGING EQUIPMENT.
3. Drain testing.
4. Preparation of ducting and conduit for on-site thermoforming.
* PLEASE NOTE : All pressures are quoted by the manufacturer and are guidelines
with the results dependent upon exact i.d. of the tube/pipe, number of turns,
conditions of the inside of the pipe and the material.
See More >
Specification
Connection | 10 mm |
Hollow Shaft | Small |
Length of Seal | 31 mm |
Material | Nylon |
Pressure | 3 bar* |
Pressure p.s.i. | 44 |
Size | 1.1/2" |
Questions
Delivery
Write Your Own Review