Press-fit Water Reducing Coupling - 35 x 28mm

Water Press-fit M profile fittings, manufactured from copper or copper alloy and are designed for use on hot and cold water services, vented and unvented closed circuit heating and chilled water applications. Press-fi t ends have a Leak Before Press (LBP) feature to indicate if joint has not been pressed. WRAS and KIWA approved. BSI Kitemark (BS 8537). Complies with DVGW Arbeitsblatt W534. Manufactured by a BS EN ISO 9001 registered company.
For identification fittings have butyl or EPDM black O rings.
Working pressure range : 16 bar at -24 to 110°C.
Fittings provide electrical continuity when pressed/installed with copper tube to BS EN 1057/+A1 R250/R290. Should not be painted or come into contact with cleaning products, paint, grease, flux, mineral oil, adhesive or other solvent based materials during installation, lagging or after installation.