Press-fit M profile fittings, with EPDM black O rings, are manufactured from 304 stainless steel. Press-fit ends have a leak before pressed feature to indicate that the joint has not been pressed. Designed for use above ground on hot and cold water services, vented and unvented closed circuit heating and chilled water applications.
Manufactured by a BS EN ISO 9001 registered company.
Fittings provide electrical continuity when pressed.
Fittings should not be painted or come into contact with cleaning products, grease, flux, mineral oil, adhesive or other solvent based materials before, during or after installation.
For installation of the fitting a press tool and M press tongs/jaws are required.